User manual SHARP CP-G10000

[. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: q Reorient or relocate the receiving antenna. [. . . ] q The recording mode will not change back until you change it manually. After you have made a recording in the monaural long-play mode, it is recommended that you return the unit to the stereo mode so that you won't forget to do so later. Recordable time (39 minites and 14 seconds) TOTAL MONO LP "MONO LP" indicator TOTAL "MONO LP" will disappear. 20 CP-G10000 (Continued) s Recording desired tracks from a compact disc onto a MiniDisc (Track Editing) START TRACK RECORD 1 Press the CD s button. 3 Select the track to start recording by turning the jog dial. q The selected track number appears. 4 Press the TRACK button. q To record a single track, skip to step 6. 5 Select the last track to record by repeatedly pressing the TRACK button. 6 Press the START button. 3 TOC DISC q Recording will start from the tracks selected in disc 1, disc 2 and disc 3, in that order. After recording, the CD and the MD will stop automatically. 1234567 8 9 10 11 12 REMAIN To cancel the track edit operation: Press the CD s button before pressing the START button. Track number at which recording starts To stop recording: Press the MD s button. q It is not possible to pause recording. 4 TOC TOTAL 3 s APMS recording Starting track Ending track 5 TOC 1 Select tracks for APMS playback. 3 Press the START button. q APMS playback will start, and recording will start automatically. After the unit has finished recording the last track, recording will stop automatically. TOTAL 34567 Total playing time from the third track to the seventh track To stop recording: Press the MD s button. s To record without using One-Touch Editing Without using one-touch recording, the following operation allows you to record from the first track. 1 Press the CD s button. 3 Press the REC q button. q The unit will enter the recording stand-by mode. 4 Press the CD 06 button. To stop recording: Press the MD s button. q After the track number has been written on the MiniDisc, the recording will stop. However, CD playback will continue. 21 CP-G10000 (Continued) s Sound synchro recording DISPLAY/CHARACTER INPUT SELECT RECORD REC LEVEL MIN MAX When music is played on another piece of equipment, such as a stereo, that is connected to this unit, this unit will automatically start recording on the MD. 1 Press the MD s button. (Page 19) INPUT SELECT SYNC REC DISPLAY REC CANCEL REC q If you will be recording from the analog input, adjust the recording level after selecting the input. 4 Press the SYNC REC button on the remote control. q The unit will enter the recording stand-by mode. (The playback on the other unit will not stop. ) q While a track is being erased, the sound from the other unit will not be heard. 1 SYNC REC REC CANCEL To resume recording: Press the MD button. Note: q The track currently being recorded cannot be canceled while you are making an APMS or random recording from a CD. 06 24 CP-G10000 EDITING We will explain the 5 editing features you can use to create your own original MiniDiscs. Playback-only MiniDiscs cannot be edited. DIVIDE A track can be divided into two tracks. If two selections were recorded as a single track because there was not enough silent space between the pieces, you can use the DIVIDE function to separate the selections. This feature is also convenient for identifying specific points with one selection so that you can locate those points easily whenever you like. (Page 27) 1 2 3 MOVE The order of the recorded tracks can be changed. (Page 29) 1 2 3 4 A 1 2 B 3 C 4 D 1 A 2 B 3 C 4 D A B C D C A B D COMBINE Two adjacent tracks (for example, the third and fourth tracks) can be combined. If there is a prolonged silent section in the middle of a selection that is recorded, a single piece of music may be recorded as two tracks. If this happens, these two tracks can be combined into a single track. (Page 28) Program move function This function allows the track numbers to be automatically rearranged in the order specified for programmed playback. (The tracks that are not included in the programmed selections will be put at the end of the new track numbers. ) (Page 29) 1 2 3 4 1 2 3 4 A 1 2 B 3 C D 1 A 2 B 3 C 4 D A B C D C A D B ERASE Tracks you want to erase can be erased one at a time or all at once. [. . . ] Make sure "TIME ADJUST" appears in the display, then press the POWER button to turn the power on again. Make sure the message on the display has changed from "GOOD BYE!" to "TIME ADJUST", and then unplug the AC power cord from the AC outlet. 43 CP-G10000 MAINTENANCE s Internal care q In order to ensure proper operation of the CD player, preventative maintenance (cleaning of the Laser Pick-up lens) should be performed periodically in order to keep the lens dust-free. Contact your local CD software dealer for options. s External care q Periodically wipe the cabinet with a soft cloth and dilute soap solution, then wipe with a dry cloth. q Do not use chemically treated cleaning cloths or other chemicals. SPECIFICATIONS As a part of our policy for continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. [. . . ]