User manual SHARP CMS-N50CDH/CP-N50H

[. . . ] It does not cover faults or damage caused by accident, misuse, fair wear and tear, neglect, tampering with the product, or repair other than by a Service Facility appointed by Sharp. As this product is intended for private domestic use only, the guarantee will not apply if the product is used in the course of a business, trade or profession. To benefit from this guarantee, any fault which occurs must be notified to Sharp, or its appointed Service Facility within one year from the date this product was purchased. The guarantee does not cover carriage costs, jewelled styli, audio tapes, compact discs or batteries. [. . . ] If the unit could find out a desired programme type you want, corresponding channel number will flash for about 3 seconds, and then a station name will flash for 7 seconds, and then remain lit. q If you want to listen to same programmed type of another station, press the PTY. TI SEARCH (PTY. TI) button whilst the channel number or station name is flashing. Note: q If no station of the programme type you want can be found, "NOT FOUND" will appear for 4 seconds. If you have selected the traffic programme: If you select traffic programme (TP) as the programme type in step 5, to receive only radio stations which broadcast traffic programmes, the TP will appear. (However, this does not necessarily mean that you will hear any traffic announcements at that time. ) When a traffic announcement is actually being made, the TA will appear. (When both the TP and TA will appear, an announcement is being made. ) 1 power on. 2, 3 1 Press the ON/STAND-BY button to turn the 2 Press the TUNER (BAND) button. 3 Press the TUNER (BAND) button to select the FM ST or FM band. 4 Press the PTY. TI SEARCH (PTY. TI) button. q "PTY TI" and "SELECT" will appear alternately for about 6 seconds. 5 Within 6 seconds, press the PRESET (X or W) button to select the programme type you want. DISC TOC TRACK MEMORY RANDOM TOTAL REMAIN kHz REC MHz SLEEP q Each time the button is pressed, the programme type will appear. If the button is held down for more than 0. 5 seconds, the programme type will appear continuously. 23 (Continued) s To manually recall the stations stored in memory When the station you are tuning in is not an RDS station or even if it is an RDS station but it is very weak signal, the display will change in the following order: PRESET(X W) Frequency MHz PRESET(X W) s Notes for Radio text Each time you press the PRESET (X or W) button the channel number will change. q After the channel number has been displayed for 2 seconds, the frequency for that channel will appear for 2 seconds, and then the station name will appear. q The radio text for 10 characters will be displayed steadily for 4 seconds and then it will scroll across the display. q If you tune into a station which is not broadcasting any radio text, even if it is an RDS station, when you switch to the radio text position "NO RT" will be displayed. (EON-AF) However, if the frequency of other network station has been stored in the preset channel memory, the unit will switch to that preset channel. q If you want to cancel the reception of an ON (other network) station which was tuned in by the EON system and return to the original station you were receiving, press the EON button. q After the unit returns to the original station, the stand-by mode will still be active. (The "TI" or "PTY" will remain lit. ) q The unit will not switch from the ON station to another network station. q When the unit switches automatically to "other network" station, if there is any problem with this station or the station cannot be received properly "WEAK SIG" will appear and the unit will return to the original station. q Even if the unit switches from the station you are listening to directly to one "other network" station which is in the preset memory, if the signals is very weak, the unit will search for another station of other net work and find out the station with the strongest signal and switch to it. However, if the signals from all the other network stations are very weak, or if the tuning conditions are very bad (due to electrical noise), the unit will be displayed "WEAK SIG", and the unit will return to the original station you were receiving. 27 RECORDING s Differences from tape recordings You cannot record music on the reverse side of a MiniDisc. MiniDiscs are single sided and should only be inserted with the correct side up. You can check the total or remaining recordable time (possible recording) before recording. This lets you plan a recording session so that the last song will not come to an abrupt end before it has finished. The date and time of a recording are automatically saved with the recording. [. . . ] q Recording cannot be performed correctly due to vibra-tion or shock in the unit. q Timer recording is impossible or there is no available space on the MD. q The number of characters for the disc name or track name exceeds 40. q A TOC is not written on the MD or there is something wrong with data. [. . . ]