User manual SHARP CD-BK3100W

[. . . ] To obtain the best performance from this product, please read this manual carefully. Z Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. When the ON/STAND-BY button is set at STAND-BY position, the unit may be brought into operation by the timer mode or remote control. [. . . ] Z You can skip to any track by pressing the / button repeatedly until the desired track number appears. Z When there is no CD in one of the disc tray 1 - 6 positions, that position will be skipped and the next CD will be played. To exchange other CDs whilst playing a disc: Press CD eject button for any stopped CD from Whilst in the stop mode, press the CD eject button for any CD from remove the disc. If the power fails whilst the tray is open, wait until the power is restored. If the disc tray is stopped forcibly, "ER-CD10" will appear in the display and the unit will not function. If this occurs, press the ON/STAND-BY button to enter the power stand-by mode and then turn the power on again. Z If TV or radio interference occurs during CD operation, move the unit away from the TV or radio. Z If a disc is damaged, dirty, or loaded upside down, the disc will be skipped. Z When the end of the last track is reached during fast forward, "DISC END" will appear on the display and CD operation will be paused. When the beginning of the first track is reached during fast reverse, the disc will start playback automatically. By pressing the ( ) button after one of the play will be performed on that disc. Among discs 1 - 6, those with whitely illuminated CD indicators in the frame can be played. However, if the button of the disc tray with no disc is pressed, playback will not start and the indicator in the frame will go out. The tracks on the disc(s) can be played in random order automatically. Within 30 seconds, press the MEMORY/SET button to store that station in memory. , , To erase entire preset memory 1 2 Press the ON/STAND-BY button to enter the power stand-by mode. Whilst pressing down the TUNER (BAND) button and the X-BASS/DEMO button, press the ON/STAND-BY button until "TUNER CL" appears. If the "MEMORY" and preset number indicators go out before the station is memorised, repeat the operation from step 2. Repeat steps 1 - 4 to set other stations, or to change a preset station. When a new station is stored in memory, the station previously memorised will be erased. The backup function protects the memorised stations for a few hours should there be a power failure or the AC power lead disconnection. Before playback: z For playback, use normal or low-noise tapes for the best sound. [. . . ] When using video equipment, connect the audio output to this unit and the video output to a television. Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorised SHARP dealer or service centre. Z If a power failure occurs during playback, the heads remain engaged with the tape. [. . . ]