User manual SHARP CD-BA250

[. . . ] No objects filled with liquids, such as vases, shall be placed on the apparatus. " Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright. [. . . ] In this case, the menu screen will not appear, and the disc will be played in the same way as a video CD without P . Some video CDs with playback control may have an "auto pause" recorded on them. When such a disc is played, the screen will stop automatically at the point where an "auto pause signal" has been inserted. If the picture looks dirty when a video CD is played back, there may be a scratch on the video CD. When repeat, random, programme, bookmark, resume, disc digest, track digest or time search play has been selected and playback begins. When track numbers are selected using the direct search, the / (NEXT ) or / ( PREV. When loading a third disc, press the DISC SKIP button to turn the disc tray, then place the video CD in the open position. Be sure to place 8 cm (3") Video CD(s) in the middle of the disc positions. You can choose up to 32 selections for playback in the order you like. Playback order When the track is memorised, "MEMORY" will appear. If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR button. When the last track on the third disc has finished playing, the unit will stop automatically. This operation is not accepted by a short time track (less than one minute), still pictures (menu display, photo, etc. When the last track on the third disc has finished playing, the unit will stop automatically. This function marks the desired scene on the video CD to play it back easily. Whilst in the stop or playback mode, hold down the BOOKMARK button on the remote control for more than 1 second. After displaying every scene, this unit will enter the pause mode automatically. Press the direct search buttons on the remote control to select the scene you want to play back. " When the third disc has finished, the unit will stop automatically. " Even if the unit is set to the stand-by mode or the function is changed from CD/ VIDEO CD (CD) to some other function, the marks will not be erased. " Marks created on one of the discs 1 - 3 will be erased when creating marks on other discs. " This function is invalid with still pictures (menu display, photo, etc. [. . . ] The radio, video CD, CD and cassette tape can all be turned off automatically. Press the TUNING/TIME ( or ) button to specify the hour to start, then press the MEMORY/SET button. Whilst the sleep time is displayed, press the TUNING/TIME ( (Maximum: 3 hours - Minimum: 1 minute) or ) button. Your system will enter the power stand-by mode automatically after the preset time has elapsed. [. . . ]