User manual SHARP BD-HP35U

[. . . ] Double click the file: "dvd_soft_HP21U_HP50U_PN9022700. zip" to open the compressed file. [. . . ] Your USB memory device should appear with a name such as "Removable Disk" or with the brand name of the device. Click on the drive option for your USB memory device, and click "Extract" *Note ­ Do not Extract the Firmware update file to any sub-folder on the USB memory device. Before removing your USB memory device from the computer, ensure that you "Safely Remove" it. Click on the icon that appears like this: and is labeled "Safely Remove Hardware". Check the file on the USB memory device, and then reinsert the USB memory device correctly. SOFTWARE UPDATE FILE IS NOT DETECTED IN THE USB MEMORY DEVICE. CONFIRM THAT YOU HAVE TRANSFERRED THE FILE TO THE USB MEMORY DEVICE AND RETRY SOFTWARE UPDATE. 5 Enter the 4-digit number using 0-9. OK ENTER 4-DIGIT PIN CODE THERE IS MORE THAN ONE SOFTWARE FILE IN THE USB MEMORY DEVICE. CONFIRM THAT ONLY THE SOFTWARE UPDATE FILE IS IN THE USB MEMORY DEVICE. OK 6 Press ENTER to start checking data in the USB memory device. INSERT USB MEMORY DEVICE CONTAINING THE SOFTWARE UPDATE FILE. OK 45 SETTINGS 8 Press ENTER to start updating. · The screen becomes dark for a while until the update screen can be displayed. Do not unplug the AC cord. THE PICTURE WILL TEMPORARILY GO DARK UNTIL THE SOFTWARE UPDATE DISPLAY APPEARS. [. . . ] WAIT SEVERAL MINUTES AND DO NOT UNPLUG THE AC CORD. OK NOW UPDATING * DO NOT UNPLUG AC CORD. UPDATE VERSION **1234567-2 30% 9 When the software is successfully updated, a screen is displayed indicating that the update process is completed. [. . . ]