User manual SHARP AY-A9GR

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP AY-A9GR. We hope that this SHARP AY-A9GR user guide will be useful to you.


SHARP AY-A9GR : Download the complete user guide (522 Ko)

You may also download the following manuals related to this product:

   SHARP AY-A9GR (663 ko)

Manual abstract: user guide SHARP AY-A9GR

Detailed instructions for use are in the User's Guide.

[. . . ] Pulling and misuse of the power supply cord can result in damage to the unit and cause electrical shock. Be careful not to expose your body directly to the outlet air for a long time. When using the air conditioner for infants, children, elderly, bedridden, or disabled people make sure the room temperature is suitable for those in the room. Inserting objects can result in injury due to the high speed rotation of internal fans. [. . . ] The built-in protective device may prevent the unit from operating when used out of this range. â· Condensation may form on the air outlet if the unit operates continuously in the COOL or DRY mode when humidity is over 80 percent. This air conditioner has a memory function to store settings when a power failure occurs. After power recovery, the unit will automatically re-start in the same settings which were active before the power failure, except for timer settings. If the timers were set before a power failure, they will need to be re-set after power recovery. In the HEAT operation, the indoor fan may not start for two to five minutes after the unit is turned on to prevent cold air from blowing out of the unit. When ice forms on the heat exchanger in the outdoor unit during the HEAT operation, an automatic de-icer provides heat for about 5 to 10 minutes to remove the ice. â· After de-icing is completed, the unit automatically resumes operation in the HEAT mode. The unit employs a heat pump that draws heat from the outside air and releases it into the room. The outside air temperature therefore greatly affects the heating efficiency. â· If the heating efficiency is reduced due to low outside temperatures, use an additional heater. In the AUTO mode, the temperature setting and mode are automatically selected according to the room temperature when the unit is turned on. In the DRY mode, the fan speed is preset to AUTO and cannot be changed. The adjusted position will be memorized and will be automatically set to the same position when operated the next time. The adjustment range is narrower the SWING range in order to prevent condensation from dripping. Manual adjustment of the vertical adjustment louvre can cause the unit to malfunction when the remote control is used for adjustment. â· When the vertical adjustment louvre is positioned at the lowest position in the COOL or DRY mode for an extended period of time, condensation may result. Do not adjust the horizontal adjustment louvre to the extreme left or right in the COOL mode with the fan speed set to "SOFT( )" for an extended period of time. The Plasmacluster ion generator inside the air conditioner will release positive and negative Plasmacluster ions into the room. Approximately the same numbers of positive and negative ions released into the air will reduce some airborne mold. Use of the PLASMACLUSTER operation will be memorized, and it will be activated the next time you turn on the air conditioner. When the PLASMACLUSTER button is pressed while the unit is not operating, the PLASMACLUSTER operation will be performed without accompanying air conditioning mode (eg, HEATING or COOLING). [. . . ] Display shown when you set the unit to reach the desired room temperature 6. The latest time setting will be memorized and will appear on the remote control display the next time you set the TIMER OFF or TIMER ON. While ONE-HOUR OFF TIMER is set, the TIMER OFF and TIMER ON setting are unavailable. The red OPERATION lamp ( ) on the unit will light and the unit will start operating in the AUTO mode. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP AY-A9GR




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP AY-A9GR will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.