User manual SHARP AY-A09BE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP AY-A09BE. We hope that this SHARP AY-A09BE user guide will be useful to you.


SHARP AY-A09BE : Download the complete user guide (4123 Ko)

You may also download the following manuals related to this product:

   SHARP AY-A09BE (615 ko)
   SHARP AY-A09BE (590 ko)
   SHARP AY-A09BE (591 ko)
   SHARP AY-A09BE (590 ko)
   SHARP AY-A09BE (582 ko)

Manual abstract: user guide SHARP AY-A09BE

Detailed instructions for use are in the User's Guide.

[. . . ] 3 For safety, turn the circuit breaker off when not using the unit for an extended period of time. 4 Check the outdoor unit mounting rack periodically for wear and to make sure it is firmly in place. Put anything on 5 Do notor drop, causing the outdoor unit nor step on it. Other applications such as in a kennel or to raise animals grow on the unit. [. . . ] The built-in protective device may prevent the unit from operating when used out of this range. ⷠCondensation may form on the air outlet if the unit operates continuously in the COOL or DRY mode when humidity is over 80 percent. (The heat mode symbol is provided only on models AY-A07BE/AY-A09BE/AY-A12BE) (The heat mode symbol is provided only on models AY-A07BE/AY-A09BE/AYA12BE) Indicates when timer on or timer off is set. At the back of batteries in 2 Insert making surethe compartment, the ± and -- polarities are correctly aligned. ⷠLines will be indicated on the display when batteries are properly installed. ⷠWhen you replace the batteries, always change both batteries, and make sure they are the same type. ⷠIf the remote control does not operate properly after replacing the batteries, take out the batteries and reinstall them again after 30 seconds. ⷠIf you will not be using the unit for a long time, remove the batteries from the remote control. Point the remote control towards the unit's signal receiver window and press the desired button. ⷠMake sure there is no curtain or other object between the remote control and the unit. ⷠThe remote control can send signals from up to 7 metres away. Do not allow the signal receiver window to receive strong direct sunlight, since it can adversely affect its operation. If the signal receiver window is exposed to direct sunlight, close a curtain to block the light. ⷠUsing a fluorescent lamp with a quick starter in the same room may interfere with transmission of the signal. The unit can be affected by signals transmitted from the remote control of a television, VCR or other equipment used in the same room. ⷠDo not leave the remote control in direct sunlight or near a heater. Also, protect the unit and remote control from moisture and shock which can discolour or damage them. AUTO/DRY MODE The temperature can be changed in 1°C increments within the range of 2°C higher to 2°C lower from the temperature automatically determined by the air conditioner. COOL(HEAT for AY-A07BE/AY-A09BE/AY-A12BE)MODE The temperature can be set within the range of 18 to 32°C. In the DRY mode, the fan speed is preset to AUTO and cannot be changed. [. . . ] ⷠThe fan speed and temperature setting are set to AUTO. During operation of the air conditioner, the air purifying filter removes dust and tobacco smoke from the air and discharges clean air. The apatite antibacterial material used in the air purifying filter suppresses activities of adsorbed viruses and other germs. the replacement period for the disposable type is approximately 3~6 months. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP AY-A09BE




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP AY-A09BE will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.