User manual SHARP AR-620N

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP AR-620N. We hope that this SHARP AR-620N user guide will be useful to you.


SHARP AR-620N : Download the complete user guide (5745 Ko)

You may also download the following manuals related to this product:

   SHARP AR-620N (2840 ko)
   SHARP AR-620N (2872 ko)
   SHARP AR-620N (6263 ko)
   SHARP AR-620N (1303 ko)
   SHARP AR-620N (2835 ko)

Manual abstract: user guide SHARP AR-620N

Detailed instructions for use are in the User's Guide.

[. . . ] While all reasonable efforts have been made to make this document as accurate and helpful as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or completeness of the information contained herein. The most up-to-date drivers and manuals are available from the Sharp web site: www. sharpusa. com Copyright © 2005 Sharp and Electronics for Imaging, Inc. This publication is protected by copyright, and all rights are reserved. No part of it may be reproduced or transmitted in any form or by any means for any purpose without express prior written consent from Sharp Electronics Corporation. [. . . ] This prevents unlimited access to the Fiery over your network and ensures network security in your environment. Using IP Port Setup options, you can close unnecessary ports and help reject inbound access from the network. IP Filtering By default, the Fiery permits all IP addresses. To control access, you can set an IP address or a range of IP addresses. Enable IP Filtering Yes/No [No] Select Yes to allow the Fiery to enable IP filtering and proceed to the subsequent IP filtering settings. Default Policy Accept/Deny [Accept] If you selected Yes to enable IP filtering, this option appears. Select Accept to accept, or Deny to reject, IP addresses other than the IP addresses you specify at this setup. Sharp AR-620N EFI Configuration Guide - 75 4 4-76 Performing Setup from the Printing Unit Control Panel Add Filter IP Filter Type IP Address/IP Range [IP Address] Select IP Address to permit or reject individual IP addresses. Select IP Range to specify a range of IP addresses to be permitted or rejected. Up to 16 IP addresses can be specified. Note: Do not enter "0. 0. 0. 0" or "255. 255. 255. 255". Delete Filter Yes/No [No] This option allows you to delete IP addresses individually or by range. Edit Filter Yes/No [No] This option allows you to make changes to IP addresses or a range of IP addresses to be permitted or rejected. To add filters, enter the IP address, IP range, and accept the filter policy. Configure IP Ports Yes/No [Yes] Select Yes to proceed to the subsequent IP Port settings. Sharp AR-620N EFI Configuration Guide - 76 4 4-77 Network Setup options 20-21 (FTP) Enabled/Disabled [Enabled] Select Enable to enable the 20-21 (FTP) ports. If access to the Print Server is restricted, you need a login password. The main objective of NDS Setup is to specify the Print Server object. Note: The terms NetWare server, Novell server, and IPX server are in common use and are used here interchangeably to mean the server on an IPX network running Novell NetWare networking software. Enable NDS Yes/No [No] Select Yes if the NetWare servers you will use to print to the Fiery are running NetWare in native mode. Select NDS Tree List of trees Use the arrow buttons to browse the list of NDS trees available to the Fiery. Press [ENTER] when you have displayed the tree that contains the Printer, Print Server, and Print Queue objects you previously defined for the Fiery. Your new NDS tree selection automatically overwrites any previous tree selection. If you change the NDS tree selection and there are also current Bindery settings, you are alerted that they will be deleted. If you continue with NDS Setup, you can replace Bindery settings later. If you do not want to continue, press the Back button to exit NDS Setup. Sharp AR-620N EFI Configuration Guide - 81 4 4-82 Performing Setup from the Printing Unit Control Panel Is user login needed to browse NDS tree?Select Yes if network permissions require that you log in to browse the NDS tree and see the Print Server object you want to select. If you select Yes, you are prompted to navigate to the User Login object. This message is displayed if you selected Yes for the previous option. [. . . ] · The Fiery is configured with the correct frame types for communication with the desired Novell servers. Sharp AR-620N EFI Configuration Guide - 165 A Novell error 220 Guest account not available. Password has expired for login name. A-166 Troubleshooting Novell error messages Cause The guest account, which you have chosen for initial login, has expired or has been disabled by the NetWare supervisor. Suggested action or exit Enable a guest account on the NetWare server for the purpose of Setup. In the ENTER LOGIN NAME screen, change the default name (guest) to supervisor or another valid login name. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP AR-620N




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP AR-620N will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.