User manual SHARP AQUOS LC-26DA5U OPERATION MANUAL

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ENGLISH 1 IMPORTANT INFORMATION CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION: DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER'S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES RECOMMENDED BY THE MANUFACTURER. [. . . ] Press EDIT. Language setting You can also select a language from the Setup menu. Select from among 3 languages: English, French and Spanish. 3 4 Press a/b to select "Register", and then press ENTER. Press a/b/c/d to select the position in the area, and then press ENTER to register. A ANALOG 1 2 3 Press MENU and the MENU screen displays. Press c/d to select "Setup". B C D 3 Press a/b to select "Language", and then press ENTER. Press a/b to select the desired language listed on the screen, and then press ENTER. English Français Español 4 39 Basic adjustment settings Picture adjustments Adjusts the picture to your preference with the following picture settings. 1 2 3 Press MENU and the MENU screen displays. Press c/d to select "Picture". Press a/b to select a specific adjustment item. Press c/d to adjust the item to your desired position. 4 NOTE · For resetting all adjustment items to factory preset values, press a/b to select "Reset", press ENTER, press c/d to select "Yes", and then press ENTER. Adjustments for AV source MENU [Picture] Audio Picture Adjustments for PC source MENU [Picture] Audio Picture OPC Backlight Contrast Off [+16] ­16 [+30] 0 On On : Display +16 +40 +30 +30 +30 +10 OPC Backlight Contrast Off [+16] ­16 [+30] 0 On On : Display +16 +40 +30 +30 +30 +30 Brightness [ Color Tint [ [ 0] ­30 0] ­30 0] ­30 0] ­10 Brightness [ Red Green Blue Advanced Reset [ [ [ 0] ­30 0] ­30 0] ­30 0] ­30 Sharpness [ Advanced Reset Selected item Backlight Contrast Brightness Color Tint Sharpness cbutton The screen dims dbutton The screen brightens Selected item Backlight Contrast Brightness Red Green Blue cbutton The screen dims dbutton The screen brightens For less contrast For more contrast For less contrast For more contrast For less brightness For less color intensity Skin tones become purplish For less sharpness For more brightness For more color intensity Skin tones become greenish For more sharpness For less brightness For more brightness For weaker red For stronger red For weaker green For stronger green For weaker blue For stronger blue NOTE · Select "Advanced" and then press ENTER to set "C. M. SHue", "C. M. S-Saturation", "C. M. S-Value", "Color Temp. ", "Sharpness Enhancement", "Automatic Contrast", "3D-Y/C", "Monochrome", "Film Mode" or "I/P Setting". See pages 41 to 42. NOTE · Select "Advanced" and then press ENTER to set "C. M. SHue", "C. M. S-Saturation", "C. M. S-Value" and "Sharpness Enhancement". See pages 41 to 42. 40 Basic adjustment settings OPC setting Automatically adjusts the brightness of the screen. Advanced picture adjustments This TV provides various advanced functions for optimizing the picture quality. 1 2 Press MENU and the MENU screen displays. 1 Press c/d to select "Picture". Press MENU and the MENU screen displays. 2 Press c/d to select "Picture". 3 4 Press a/b to select "OPC". 3 Press c/d to select "On" or "On: Display". Press a/b to select "Advanced", and then press ENTER. · You can select "C. M. S-Hue", "C. M. SSaturation", "C. M. S-Value", "Color Temp. ", "Sharpness Enhancement", "Automatic Contrast", "3D-Y/C", "Monochrome", "Film Mode" or "I/P Setting". · See the table for the selectable parameters. 4 OPC Backlight Contrast Off [+16] ­16 [+30] 0 On On : Display +16 +40 +30 +30 +30 +10 Brightness [ Color Tint [ [ 0] ­30 0] ­30 0] ­30 0] ­10 Sharpness [ Advanced Reset 5 Selected item Off On On: Display Description The brightness is fixed at the value set in "Backlight" (see page 40). Automatically adjusts Displays the OPC effect on the screen while adjusting the brightness of the screen. C. M. S. (Color Management System) Color tone is managed using the six-color adjustment setting. Selected item C. M. S-Hue C. M. SSaturation C. M. SValue Description This is a standard to adjust the color either more reddish or more bluish in tone. · Pressing POWER on the TV will have the same result. Press a/b to select "No Operation Off", and then press ENTER. Press c/d to select "Enable", and then press ENTER. · Five minutes before the power shuts down, remaining time displays every minute. NOTE · "Disable" is factory preset value. 44 Basic adjustment settings Digital Setup This setting allows you to set the image of Digital broadcasting. 4 Press a/b to select "REC Picture Size", and then press ENTER. Screen Size Video Setup You can adjust the settings for Digital image. REC Picture Size 4 : 3 TV 16 : 9 TV Screen Size Set the format of image of Digital broadcasting. 1 2 3 Press MENU and the MENU screen displays. 5 Press c/d to select the desired picture size, and then press ENTER. Description Bars may appear on the top and bottom with some programs Displays in full screen Press c/d to select "Digital Setup". Selected item 4:3 TV Press a/b to select "Video Setup", and then press ENTER. Press c/d to select "Manual" or "Auto". 16:9 TV 4 5 Audio Setup You can output digital audio to an AV amplifier or similar device whose DIGITAL AUDIO INPUT terminal is connected to the DIGITAL AUDIO OUTPUT terminal on the TV (see page 51). Please select an audio output format compatible with the audio format of the program you are watching and the equipment connected. Selected item Manual Description With 480i/480p/720p broadcasts you can change the screen size to the size of your choice. All broadcasts will be converted and displayed in the 1080i format. 1 2 3 Press MENU and the MENU screen displays. Auto Press c/d to select "Digital Setup". NOTE · "Manual" is factory preset value. REC Picture Size Select the screen size to record on 16:9 video. Press a/b to select "Audio Setup", and then press ENTER. Press a/b to select "PCM" or "Dolby Digital", and then press ENTER. Description The optical output terminal outputs audio signal by PCM form. If your digital audio system does not support Dolby Digital, select "PCM". The optical output terminal outputs audio signal by Dolby Digital form. It reproduces sound from surround program of digital. 1 2 3 Press MENU and the MENU screen displays. 4 Press c/d to select "Digital Setup". Selected item PCM Press a/b to select "Video Setup", and then press ENTER. Dolby Digital 45 Using external equipment You can connect many types of external equipment to your TV, like a DVD player, VCR, Digital TV tuner, PC, HDMI equipment, game console and camcorder. To view external source images, select the input source with INPUT on the remote control unit or on the TV. Displaying an external equipment image Explanation here is for the setting when connecting DVD to INPUT1 terminal. Selecting the INPUT signal 1 2 3 Press MENU and the MENU screen displays. Press c/d to select "Option". Press a/b to select "Input Select", and then press ENTER. MENU [Option . . . Input Select] Option Audio Only 3D Noise Reduction [Low] Mosquito Noise Reduction [Low] Input Select Output Select Quick Shoot Caption Setup [Auto] [Fixed] [On] To watch a DVD image, select "INPUT1" from "INPUT SOURCE" menu using INPUT on the remote control unit or on the TV. [. . . ] Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp. The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. [. . . ]