User manual SHARP AL-2051

[. . . ] This guide explains how to install the machine, and indicates important points to note for installation and usage. Read and understand this guide to ensure that you install the machine correctly. After installation, read the Operation Guide to make full use of all the machine has to offer. Open the carton and check if the following components and accessories are included. [. . . ] Detailed explanations of the functions that can be used on the machine are provided in the Operation Guide in PDF format. Adobe® Reader® can be downloaded from the following URL: http://www. A paper form operation manul can be obtained from your authorized SHARP dealder or upon request by contacting SHARP. 78 Please inform the model name, the serial number of the machine and the language needed. 7 seconds (When user program 24 is set to ON) First-copy time*2 (paper: A4, exposure mode: AUTO, copy ratio: 100%) Warm-up time*3 Approx. Document glass: Variable: 25% to 400% in 1% increments (total 376 steps) Fixed preset: 25 %, 50 %, 70 %, 86 %, 100 %, 141 % Copy ratio RSPF: Variable: 50% to 200% in 1% increments (total 151 steps) Fixed preset: 50 %, 70 %, 86 %, 100 %, 141 %, 200 % Document glass: Moving optical source, slit Exposure system exposure (stationary platen) with automatic exposure function RSPF: Moving original One automatic feeding paper tray and one optional Paper feed paper tray (250 sheets each) + bypass tray (50 sheets) Fusing system Heat rollers Developer system Magnetic brush development Tri-color CCD light source (CCD: 3 components; R, Light source G, and B) Scan: 600 x 300 dpi Output: 600 x 600 dpi (AUTO/ Resolution TEXT mode) Scan: 600 x 600 dpi Output: 600 x 600 dpi (PHOTO mode) Gradation 256 tones (8 bits) Local voltage ±10% (For this copier's power supply Power supply requirement, see the name plate located on the back of the unit. 7 B Standby mode: - (*) Sound pressure level LpAm (reference) (Bystander positions) Noise level Copying mode: 51 dB Standby mode: - (*) (*) = Less than background noise Noise emission measurement in accordance with ISO7779. Model Type Photoconductive type Document glass type Copy/printing system Originals Originals size *1 When making multiple duplex copies, the copy speed will vary based on the environment conditions. Type Scanning method Flatbed scanner Document glass/RSPF Tri-color CCD light source Light source (CCD: 3 components; R, G, and B) Basic: 600 dpi x 600 dpi Resolution Setting range: 50 dpi - 9600 dpi Original types Sheet media, books Effective scanning area 216 mm (Lengthwise) x 356 mm (Width) Scanning speed 2. 0 Interface (Full-Speed/Hi-Speed compatible interface) Drop out color Yes Supported operating Windows 2000 Professional/XP/Vista/7 systems Void area None [USB cable] USB cable that supports USB 2. As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. the performance specification figures indicated are nominal values of production units. When ordering supplies, please use the correct part numbers as listed below. For best copying results, be sure to use only SHARP Genuine Supplies which are designed, engineered, and tested to maximize the life and performance of SHARP copiers. 18, 000 sheets * Based on copying onto A4-type paper at 5% toned area (The life of the TD cartridge which has been included in the machine at the factory is approximately 2, 000 sheets. The MSDS (Material Safety Data Sheet) can be viewed at the following URL address: http://www. Each instruction also covers the optional units used with the product. The SOFTWARE LICENSE will appear when you install the software from the CD-ROM. [. . . ] Store spare supplies such as drum cartridges and TD (Toner/Developer) cartridges in a cool dry place without removing from the package before use. If they are exposed to direct sunlight, or excessive heat, poor copies may result. At the production line, the output power of the scanner unit is adjusted to 0. 18 MILLIWATT PLUS 5% and is maintained constant by the operation of the Automatic Power Control (APC). [. . . ]