User manual SENNHEISER SK 2013 PLL

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SENNHEISER SK 2013 PLL. We hope that this SENNHEISER SK 2013 PLL user guide will be useful to you.


SENNHEISER SK 2013 PLL : Download the complete user guide (510 Ko)

You may also download the following manuals related to this product:

   SENNHEISER SK 2013 PLL (1785 ko)
   SENNHEISER SK 2013 PLL (1785 ko)
   SENNHEISER SK 2013 PLL (1785 ko)
   SENNHEISER SK 2013 PLL (1785 ko)
   SENNHEISER SK 2013 PLL (1785 ko)

Manual abstract: user guide SENNHEISER SK 2013 PLL

Detailed instructions for use are in the User's Guide.

[. . . ] Loud secondary noises and poor room acoustics can be faded out with the use of the additional microphone MKE 2013 on the Transmitter SK 2013 PLL. The wide range of accessories allows connection of the receiver to nearly any type of hearing aid; the connection to the hearing aid can be either electrical or inductive. 2. 4 SK 2013 PLL or EK 2013 PLL B 2013 BA 2013 The Transmitter SK 2013 PLL and the Receiver EK 2013 PLL are supplied with current by attachable RECHARGEABLE battery packs, type BA 2013. These battery packs are charged over night separately or in conjunction with their unit in the Dual Charging Unit L 2013. One battery pack has sufficient power for a normal working day (up to 12 hours). [. . . ] Operation on hearing aid with audio input The small jack (2. 5 mm dia. ) supplies the output signal for a hearing aid with an audio input. (also see , , CABLES") Operation on hearing aid without audio input The , , Tele-Loop" ETZ 1011 or the Induction Disc EZI 120 for hearing aids without an audio input is connected to the large jack (3. 5 mm dia. ). Operation with headphones Stereo headphones (impedance > 32 ) are connected to the large jack. 2. 8 M S Lockable cover on receiver In order to reach the operating elements, a slide (S) is located on the right side of the unit. This protects the operating elements against unauthorized or accidental use. It is secured with a set screw (M), which is screwed in completely in order to open the slide. After removing the slide two potentiometers are accessible: · · The lower potentiometer (P1) adjusts the receiver volume, i. e. The upper potentiometer (P2) adjusts the basic volume of the built-in microphone. Automatic fade-in and microphone adjustment The receiver is equipped with an automatic fade-in feature. The connected hearing aid microphone or the microphone built into the receiver are turned down for the duration of speech transmission. This enables the signal of the speaker to be given preference at the wearer of the receiver. In addition, the automatic fade-in is complimented by a speech filter. As a result, disturbing noises (doors banging etc. ) do not trigger the automatic fade-in feature. The automatic fade-in and the basic volume of the faded-in microphone can be set separately. 2. 9 s1 1 23 4 1 23 4 s2 ON s Off e P2 P1 Off ON Setting automatic fade-in This adjustment is made exclusively by the hearing aid dealer!An adjuster (E) for the reduction depth of the automatic fade-in is located at the top behind a hole in the housing. Turning clockwise increases the reduction depth of the connected hearing aid microphones. Switching automatic fade-in and built-in microphone on/off This adjustment is made exclusively by the hearing aid dealer!Two toggle switches (S1/2) are accessible in the unit between the potentiometers for switching on the automatic fade-in and microphone. · · If the switch (S2) is tipped toward the back of the unit, the automatic fade-in feature is switched on. If the switch (S1) is tipped toward the upper side of the unit, the built-in microphone is switched on. (The EK 2013 PLL is delivered with this setting). 2. 10 Indicator lamps on the receiver EK 2013 PLL l1 l2 Two LED indicator lamps are located on the front of the unit. Automatic fade-in, green led L1 indicates that the acoustic signal is being correctly transmitted. [. . . ] Input resistance Operating voltage Current consumption Operating time Battery check Dimensions Weight (incl. Scope of delivery Also included in the System 2013 (set of transmitter and receiver) are two securing plates with retaining straps. The System 2013 is supplied in a sturdy transport and storage carrying case. 2. 15 Technical data Receiver EK 2013 PLL Frequency range EK 2013-6-D EK 2013-6-1 EK 2013-6-2 EK 2013-6-3 EK 2013-8 EK 2013-9 8 m frequency band 8 m frequency band 8 m frequency band 8 m frequency band 4 m frequency band 2 m frequency band 36. 64-37. 98 MHz 30-36 MHz 35-40 MHz 39-45 MHz 72. 025-75. 975 MHz 173. 350-175. 02 MHz Frequency preparation Phase Lock Loop (PLL) Technique, 16 channels Modulation type FM Rated lift/peak lift ± 8 kHz / ± 12 kHz Channel grid/switching band width EK 2013-6-D EK 2013-6-1 EK 2013-6-2 EK 2013-6-3 EK 2013-8 EK 2013-9 40 kHz / 2. 34 MHz 40 kHz / 2 MHz 40 kHz / 2 MHz 40 kHz / 2 MHz 25 kHz / 4 MHz 25 kHz / 2 MHz Sensitivity (measured via artificial antenna) Neighboring channel selection LF transmission range Nonlinear distortion factor at 1 kHz and rated lift LF output 1: LF output 2: 3. 5 mm dia. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SENNHEISER SK 2013 PLL




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SENNHEISER SK 2013 PLL will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.