User manual SENNHEISER SK 1063-U

[. . . ] 7 Putting the bodypack transmitter into operation. . . . . . . . . . . . . . 8 Inserting the batteries/accupack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Charging the accupack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Using the bodypack transmitter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Muting the audio signal or deactivating the RF signal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] You can switch the bodypack transmitter on and deactivate the RF signal on switch-on. For more information, see page 12. 11 Using the bodypack transmitter To switch the bodypack transmitter off: If necessary, deactivate the lock mode (see page 12). ON/OFF Keep the ON/OFF button pressed until "OFF" appears on the display panel. When in the operating menu, pressing the ON/ OFF button will cancel your entry (ESC function) and return you to the current standard display. To switch the bodypack transmitter on and to deactivate the RF signal on switch-on (offline operation): ON/OFF Keep the ON/OFF button pressed until "RF Mute On?" appears on the display panel. Slide the MUTE switch MUTE · to the left, to the position MUTE. 13 Using the bodypack transmitter The current state of the muting function or the RF signal is displayed on the display panel of the bodypack transmitter. 533. 875 MHz ew100 G3 AF P MUTE Audio signal is muted Transmitter's display panel: "MUTE" is displayed Audio signal is activated (muting is deactivated) Transmitter's display panel: "MUTE" RF signal is deactivated Transmitter's display panel: transmission icon displayed, "MUTE" displayed RF signal is activated Transmitter's display panel: Transmission icon displayed, "MUTE" displayed is is not is not is is not displayed You can also deactivate the RF signal on switch-on. For more information, refer to the chapter "Switching the bodypack transmitter on/off" on page 12. Using the ON/OFF button, you can also activate/ deactivate the RF signal during operation. To do so, briefly press the ON/OFF button and proceed as described on page 12. 14 Using the bodypack transmitter Selecting a standard display Press the rocker button to select a standard display: Contents of the display Selectable standard display "Frequency/Name" 533. 875 MHz ew100 G3 AF P MUTE B. Ch: 20. 12 533. 875 MHz AF "Frequency bank/Channel/ Frequency" P MUTE ew100 G3 B. Ch: 20. 12 AF "Name/Frequency bank/ Channel" P MUTE 15 Using the operating menu Using the operating menu A special feature of the Sennheiser ew G3 series is the consistent, intuitive menu structure of transmitters and receivers. As a result, adjustments to the settings can be made quickly ­ even in stressful situations, for example on stage or during a live show or presentation. Make use of the possibility to adjust settings via the operating menu of the receiver and to transfer these settings to the bodypack transmitter. For more information on how to transfer settings to the bodypack transmitter, refer to the instruction manual of your receiver. Activating/deactivating the automatic lock mode ­ "Auto Lock" SET Menu Auto Lock Active Call up "Auto Lock" Auto Lock Active Select the desired setting Auto Lock Inactive Store the setting SET "Stored" The lock mode prevents that the bodypack transmitter is accidentally switched off or programed during operation. The lock mode icon on the current standard display indicates that the lock mode is activated. For information on how to use the lock mode, refer to page 12. 22 Adjusting settings via the operating menu The extended menu "Advanced Menu" Setting transmission frequencies for the frequency bank "U" ­ "Tune" When you have selected one of the system banks and then select the "Tune" menu, the bodypack transmitter automatically switches to channel 1 of the frequency bank "U". Upon delivery, the channels of the frequency bank "U" are not assigned a transmission frequency. When you are in the "Tune" menu item, the RF signal is deactivated. Via the "Tune" menu item, you can set a transmission frequency to be stored in the current channel or you can select a different channel in the frequency bank "U" and assign this channel a transmission frequency. Setting a transmission frequency for the current channel Press the rocker button until the "Tune" menu item appears. The frequency selection appears. SET Advanced Menu Tune 543. 200 MHz Call up "Tune" Tune 543. 200 MHz B. Ch: U. 1 Select the MHz value and confirm SET Tune 544. 200 MHz B. Ch: U. 1 Select the kHz value; store the setting SET "Stored" Set the desired frequency. Selecting a channel and assigning this channel a frequency Press the rocker button until the "Tune" menu item appears. [. . . ] Cancel the muting (see page 13). Receiver's squelch Reduce the squelch threshold is threshold setting on adjusted too high the receiver. Bodypack transmitter doesn't transmit a pilot tone Bodypack transmitter's sensitivity is adjusted too low/too high Activate or deactivate the pilot tone transmission (see page 24). Adjust the input sensitivity (see page 20). Audio signal has a high level of background noise or audio signal is distorted If a problem occurs that is not listed in the above table or if the problem cannot be solved with the proposed solutions, please contact your local Sennheiser partner for assistance. To find a Sennheiser partner in your country, search at www. sennheiser. com under "Service & Support". 29 Accessories and spare parts Accessories and spare parts The following accessories are available from your specialist dealer: Cat. [. . . ]