User manual SENNHEISER S-MCD 3000 HP V1.2

[. . . ] The Sennheiser SMCD software gives professional users a modern, advanced way of controlling several EM 3532 twin receivers in a simple and convenient way. the Sennheiser SMCD software allows you to handle and control up to 126 EM 3532 receivers. You can program entire sequences of scenes with several actors without changing the transmitter/receiver unit. During use you can monitor battery status, VU level and transmitting frequency. [. . . ] Mark the line in the frequency list in which the new frequency is to be entered. Click onto the "Place" button" in order to enter the frequency at the desired place. The frequency and the channel number are now taken over into the two fields below the frequency list. Now click onto the line in the frequency list at which you would like to enter the altered frequency/channel number. Click onto the "Place" button in order to carry out the alteration at the desired place. Mark the frequency which you would like to delete from the frequency list. NOTE When the list comprises only one frequency, this cannot be deleted. If you attempt you delete this frequency, an error message is generated. The warning limits for the RF field strength and the frequency deviation can be specified using the slide switches. If the values go above or below the limits, the color of the display bar will change. You can add a scene after the last scene or insert a scene between existing scenes. Via the button Click onto this button to add a a new scene onto the end. Click onto this button to insert a new scene immediately after the current scene. Via the menu bar To add a scene onto the end, select the "Add scene" command in the menu item "Configuration". Note When you insert a new scene between existing scenes, the numbering changes. Delete a scene via the "Delete scene" command in the menu item "Configuration". After deleting or inserting scenes, you should rearrange or renumber the scenes. NOTE This is the only mode in which a transmission between PC and receiver is possible. It is necessary to halt the production before you can make further alterations to the scenes or the control panels. You can also carry out the above functions via commands in the menu bar. You can adapt the color of the desktop your own personal requirements. You can call up the "Color" function via the menu item "Options": The editing window "Color" then appears. [. . . ] Enter the name "Tom" in the "Actor name" field of the first panel. Enter a 4 in the "Receiver address" field of the first panel. Enter the name "Claudia" in the "Actor name" field of the second panel. Enter a 5 in the "Receiver address" field of the second panel. [. . . ]