User manual SENNHEISER RS 85

[. . . ] System components and connections - 1 receiver HDR 85 - 1 transmitter T 80 - 2 rechargeable batteries BA 151 - 1 power supply - 1 mini jack plug 3, 5 mm with adapter to 1/4" 6, 3 mm (925 MHz jack to 2x phono plug) - instructions for use Establish the necessary connections. Charge the accupack for 24 hours before you use it for the first time!Do not place the transmitter close to metal objects such as shelf bars, reinforced concrete walls, etc. [. . . ] To select a channel, press the CHANNEL button until the desired LED or LED combination lights up: LED 1 channel 1 active LED 2 channel 2 active LED 1 and 2 channel 3 active (except 863 MHz version). Complete freedom of movement It is not necessary that transmitter and headphone receiver are in a direct line of sight, so you can move around freely in the home or outside in the garden. One transmitter can be used to transmit to several receivers on the same frequency. Additional headphones with the designation HDR 85 are available from your specialist dealer. Please make sure to choose headphones with the same frequency range as the transmitter you are using (see type plate on the bottom of the transmitter). Always store the headphones on the transmitter to ensure that they are fully charged when they are needed. The headphones are automatically switched off by the charging process. BA 151 spare accupack When the headphones' accupack is going flat (noise, interference and distortion are sure signs of a flat accupack), recharge the accupack. After an initial charging of 24 hours, the normal charging time is 14 hours. Place the discharged accupack in the charging compartment at the back of the transmitter and use the spare accupack in the meantime. Additional BA 151 spare accupacks can be charged via the L 151-2 charger (available from your specialist dealer). Before disposing of an old and exhausted accupack, make sure that it is totally discharged by using it until the device switches off. To protect the environment, only dispose of totally exhausted accupacks. HiDyn plusTM This device is equipped with HiDyn plusTM, Sennheiser´s noise reduction system that reduces noise and interference in wireless transmission systems. Additional information The audio transmission technology used with this device is basically that of a radio. According to today's scientific knowledge, the radio waves emitted by this device are not harmful to humans or animals. For connection to mono devices, please use a stereo to mono jack plug available from most audio accessory shops. Use a soft cloth or, if necessary, a damp wash-leather for cleaning the devices. [. . . ] > 85 dBA see type plate located on the bottom of ransmitter 3 (2 with 863 MHz version) 3. Charger un pack d'accus Pour charger le pack d'accus, placez le casque sur l'emplacement prévu sur l'émetteur de façon que le logo Sennheiser soit positionné à l'avant. Pack d'accus de rechange BA 151 Lorsqu'un accu de casque est déchargé (bruits d'interférences et son distordu sont les signes d'un accu déchargé), rechargez le pack d'accus. [. . . ]