User manual SENNHEISER MX W1

[. . . ] 19 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Accessories and spare parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Manufacturer declarations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The USB interface of your computer can be damaged if you connect the docking station using the charging cable . Only charge the docking station using the power supply unit . µ ´ To charge the devices (simultaneously or separately): Connect the charging cable to the power supply unit . Connect the charging cable to the charging jack of: ­ the transmitter µ and the docking station ­ or the earphones ´. If you want to charge all devices at one go, insert the earphones into the charging compartments of the docking station. Note: ­ The transmitter has its own built-in rechargeable battery. ­ With a fully charged rechargeable battery, the operating time of the transmitter is approx. Charging the earphones on the move When on the move, the earphones can be charged up to three times in the docking station, without the docking station having to be connected to the mains. » Insert the earphones into the charging compartments of the docking station. 8 Associating the earphones to the transmitter (Pairing) The MX W1 earphones and transmitter are already paired on delivery. To enable wireless transmission, both the earphones and the transmitter have to recognize each other: 1. Enrollment mode After switch-on, a suitable device is searched. 0 1s 2s 2. Association mode If a suitable device is detected, both devices will exchange device identification information. 0 1s 2s 3. Pairing mode If the exchange of device identification information is possible, the devices automatically try to connect. 0 5s 10s 9 Associating a second pair of earphones to the transmitter With one transmitter you can associate up to two pairs of earphones. If you want to use another pair of earphones, you have to pair your transmitter and the new earphones: Switch the new earphones off (see page 14). Switch the transmitter and the already paired earphones on (see page 14). ON ON OFF Switch the transmitter off (see page 14). 4s ON OFF OFF Press and hold the operation/pairing button of the new earphones until the LEDs flash rapidly. ON OFF 7s ON 10 Press and hold the operation/pairing button of the transmitter until the LED flashes rapidly. 7s ON ON ON After approx. The LEDs flash blue once every 5 seconds. ON ON ON Note: The distance between transmitter and earphones should not exceed 1 m during association. Associating the earphones to Kleer compatible devices MX W1 is fully compatible to Kleer wireless standard. For pairing the MX W1 with other Kleer compatible devices, please refer to the preceding chapter and to the user manual of your device in question. 11 Setting up your MX W1 for usage Fixing the transmitter to your audio device Fix the transmitter with the help of: · the fabric strap · or one of the rubber bands (see illustration). Connecting the transmitter to your audio device You can connect the transmitter to an ¸ MP3 player or any audio device with a 3. 5 mm stereo headphone socket: Connect the stereo plug of the transmitter ¸ to the 3. 5 mm stereo headphone socket of your audio device. 12 Adjusting the earphones to your ears Sennheiser's twist-to-fit system and comfortable earpads allow for the best custom fit enabling you to enjoy seamless high fidelity stereo sound. The perceived sound quality of the earphones depends to a large extent on a correct fit. For best sound enjoyment, please use the supplied earpads and twist-tofit pads. If the pre-mounted twist-to-fit pads (size M) do not fit your ear, use the smaller or larger ones. Carefully remove the twist-to-fit ML S pads ³ from the earphones. [. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. [. . . ]