User manual SENNHEISER K6

[. . . ] The K6 and K6P powering modules power the various microphone heads of the K6 modular microphone system and provide them with a balanced microphone level output. [. . . ] 5V AA (LR6) size battery (taking care to observe the correct polarity) into the powering module and screw on a microphone head. If the LED is bright, the battery capacity is OK, if it is dim, the battery is low and should be replaced. â· When the powering module is connected to a phantom power source, it automatically switches from battery to phantom power operation, thus conserving the battery. Phantom power operation (K6 and K6P) Both the K6 and K6P powering modules can be powered by 12-48V DC phantom power via the connection cable (phantom powering). Roll-off filter The bass roll-off filter (B) (see drawing on previous page) effectively rejects rumble, handling, pop and wind noises, as well as reducing the proximity effect when used in close miking situations. * Resultant length: this is the figure you need to add to the capsule length to give the overall length of the complete microphone. [. . . ] Up to date information on Sennheiser products can also be found on the Internet under "http://www. [. . . ]