User manual SENNHEISER IS 410

[. . . ] 5 Connecting the transmitter to the sound source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Connecting the transmitter to the mains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Inserting and removing the receiver's rechargeable battery . . . . . . . . 8 Inserting a spare rechargeable battery into the transmitter's charging compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The transmitter has an integrated charging compartment for storing the receiver and simultaneously charging the receiver's rechargeable battery. In addition, a spare rechargeable battery can be charged in the small charging compartment at the side of the transmitter. Delivery includes Delivery of the IS 410 stethoset receiver system includes: 1 RI 410 stethoset receiver 1 TI 410 transmitter with integrated charging compartment 1 BA 300 Lithium-Ion rechargeable battery 1 mains unit 1 connecting cable fitted with two 3. 5 mm stereo jack plugs for connection to headphone socket (with one adapter to 1/4" (6. 3 mm) jack socket) 1 adapter to RCA socket (e. g. TB/Aux-Out) 2 pairs of replacement ear cushions Instructions for use 3 Operating controls A Receiver (see inside cover) ³ Volume control · Compartment for BA 300 rechargeable battery » Balance control B Transmitter (see inside cover) ¿ 3. 5 mm stereo jack socket labeled AUDIO (marked blue) for connection of sound source ´ DC socket labeled 12 V (marked yellow) for connection of mains unit ² "Speech intelligibility" button ¶ Charging compartment for receiver º Charging compartment for spare rechargeable battery B LED indications (see inside cover) ¾ Charging control LED for spare rechargeable battery µ Charging control LED for receiver rechargeable battery ¸ Operation indication C Connection possibilities (see inside cover) ¹ Connecting cable for headphone socket Adapter to 1/4" (6. 3 mm) jack socket Adapter to RCA socket SCART adapter (optional) Mains unit 4 Putting the system into operation Setting up the transmitter Place the transmitter so that there are no obstacles in the light path between transmitter and receiver. Direct sunlight may interfere with the reception and may damage the transmitter. If you use a plasma TV screen, please observe the following to ensure interference-free reception: Make sure that the transmitter's infrared light beam is pointed directly at the receiver and that the light path between transmitter and receiver is not obstructed. If necessary, use a standard extension cable (3. 5 mm stereo jack plug) to reduce the distance between transmitter and receiver. This extension cable is available from your Sennheiser dealer. Connecting the transmitter to the sound source Plug in one end of the connecting cable ¹ to the blue AUDIO socket on the transmitter. TV). A B C D No socket TV L Headphone socket TV R RCA sockets AV SCART socket External microphone 5 A Connecting the transmitter via the headphone socket hea t oucket so dio e au phon d ¹ Plug in the other end of the connecting cable ¹ to the headphone socket on your sound source. Adjust the volume of the headphone socket on your sound source to a medium level. Note: With most TVs, the headphone socket is located at the front or sides. In order to prevent damage to hearing, newer TVs often have a function that mutes the TV sound as soon as headphones are connected. If another person wants to listen to the TV sound via the loudspeaker, deactivate the muting function via the TV menu setting. B a t out io cke ud so RC A Connecting the transmitter via the RCA sockets Connect the connecting cable ¹ to the adapter . R L ¹ Connect the red and white RCA connectors of the adapter to the matching red and white RCA sockets on your sound source. Note: With most TVs, the RCA sockets are located at the rear. 6 C Connecting the transmitter via the SCART socket If your sound source has a SCART socket, you can order the suitable SCART adapter (see "Accessories" on page 15) from your Sennheiser dealer. ¹ Connect the connecting cable ¹ to the SCART adapter . Plug in the SCART adapter to the SCART socket on your TV. If your TV has several SCART sockets, select a SCART socket that is also an output (for details, see operating manual of your TV). D Using an external microphone If your sound source doesn't have a headphone or audio output, SCART or RCA socket, you can use your system together with an external microphone (see "Accessories" on page 15). on the Position the microphone in front of the loudspeaker of your sound source. You can change the sound by varying the position of the microphone in front of the loudspeaker. Connecting the transmitter to the mains Connect the mains unit to the yellow socket (12 VDC) the transmitter. If the receiver is stored in the transmitter's charging compartment , the LED ¸ goes off. Note: Pull the mains connector out of the wall socket when the transmitter will not be used for extended periods of time (e. g. In this case, however, the rechargeable battery will not be recharged. 7 Inserting and removing the receiver's rechargeable battery Insert the battery into the compartment as shown on the left. To remove the battery, use the finger catch projection to pull the battery out of the receiver. Before you use the rechargeable battery for the first time, charge it until the LED µ lights up green (see "Storing and charging the receiver" on page 11). This can take a maximum of 3 hours. Inserting a spare rechargeable battery into the transmitter's charging compartment You can charge a spare battery (not included) in the charging compartment at the side of the transmitter. [. . . ] provided that no national law limits our terms of guarantee. CE Declaration of Conformity This equipment is in compliance with the essential requirements and other relevant provisions of Directive 89/336/EC. The declaration is available on the internet site at www. sennheiser. com. Before putting the device into operation, please observe the respective countryspecific regulations! Batteries or rechargeable batteries The supplied batteries or rechargeable batteries can be recycled. Please dispose of them as special waste or return them to your specialist dealer. [. . . ]