User manual SENNHEISER EW 165 G2

[. . . ] W 100 Instructions for use Safety instructions Never open electronic units!If units are opened by customers in breach of this instruction, the warranty becomes null and void. Keep the units away from central heating radiators and electric heaters. Do not use any cleansing agents or solvents. Thank you for choosing Sennheiser! We have designed this product to give you reliable operation over many years. [. . . ] and open the battery compartment µ » Press the ON/OFF button µ to switch the bodypack receiver/transmitter on. To switch the bodypack receiver/transmitter off, press the ON/OFF button µ until "OFF" appears on the display. locks ¾ º Switching the plug-on transmitter on/off Press the ON/OFF button LED lights up. The red until To switch the plug-on transmitter off, press the ON/OFF button "OFF" appears on the display. The red LED goes off. ¶ º 22 Switching the radiomicrophone on/off ¸ ¹ Turn the protective cap at the bottom of the radiomicrophone so that the ON/OFF button ¹ becomes accessible. To switch the radiomicrophone off, press the ON/OFF button ¹ until "OFF" appears on the display. The red LED ¸ goes off. ¶ Muting the transmitters All transmitters have a MUTE switch that noiselessly mutes the transmitter's audio signal without switching the transmitter off. SK 100 G2 Muting the SK 100 G2 and SKP 100 G2 transmitters Set the MUTE switch to the position 'MUTE'. The "MUTE" display appears on the transmitter display panel. Provided that the pilot tone function is activated on both the transmitter and the receiver, the "MUTE" display also appears on the receiver display panel. SKP 100 G2 Set the MUTE switch back to the original position to retransmit the audio signal. Muting the SKM 100 G2 radiomicrophone Turn the protective cap at the bottom of the radiomicrophone so that the MUTE switch becomes accessible. The "MUTE" display appears on the transmitter display panel. Provided that the pilot tone function is activated on both the transmitter and the receiver, the "MUTE" display also appears on the receiver display panel. Set the MUTE switch back to the original position to retransmit the audio signal. ¶ Activating/deactivating the lock mode All transmitters and receivers have a lock mode that can be activated or deactivated via the operating menu (see: , , Activating/deactivating the lock mode" on page 35). The lock mode prevents that the transmitter or receiver is accidentally programmed or switched off during operation. 23 Attaching the components to clothing Attaching the bodypack receiver/transmitter to clothing The bodypack receiver/transmitter is attached to clothing (e. g. The clip is detachable so that you can also attach the bodypack receiver/ transmitter with the antenna pointing downwards. To do so, withdraw the clip from its fixing points and attach it the other way round. The BPP 1 bodypack pouch (available as an accessory) helps to protect the bodypack receiver/transmitter against moisture. 24 The operating menu A special feature of the Sennheiser ew 100 G2 series is the similar, intuitive operation. As a result, the units are easy to operate and adjustments to the settings can be made quickly and "without looking" ­ even in stressful situations, for example on stage or during a live show or presentation. The buttons Buttons ON/OFF or POWER (EM 100 G2 only) SET Mode Standard display Operating menu Setting mode Standard display Operating menu Setting mode Standard display / Operating menu Setting mode To . . . turn the transmitter or receiver on and off cancel the entry and return to the standard display cancel the entry and return to the standard display get into the operating menu get into the setting mode of the selected menu store the settings and return to the previous menu level without function change to the previous menu ( ) or change to the next menu ( ) adjust the setting of the selected menu: option ( / ) Overview of menus Display BANK CHAN TUNE SCAN SENSIT AF OUT SQELCH DISPLY NAME RESET PILOT LOCK EXIT Receivers Switching between channel banks Switching between the channels in a channel bank Setting a receiving frequency for the channel bank "U" (user bank) Scanning the selected channel bank for free channels Transmitters Switching between channel banks Switching between the channels in a channel bank Setting a transmission frequency for the channel bank "U" (user bank) Adjusting the sensitivity (AF) Adjusting the audio output level Adjusting the squelch threshold Selecting the standard display Entering a name Loading the factory-preset default settings Activating/deactivating the pilot tone evaluation Activating/deactivating the lock mode Exiting the operating menu and returning to the standard display Selecting the standard display Entering a name Loading the factory-preset default settings Activating/deactivating the pilot tone transmission Activating/deactivating the lock mode Exiting the operating menu and returning to the standard display 25 Working with the operating menu By way of example of the "TUNE" menu, this section describes how to use the operating menu. After switching the unit on, the standard display is shown on the display panel. EM 100 G2 EK 100 G2 Getting into the operating menu Press the SET button to get from the standard display into the operating menu. The last menu selected flashes on the display. Transmitters Selecting a menu Press the / buttons to select a menu. Press the SET button to get into the setting mode of the selected menu. [. . . ] power consumption at nominal voltage Power consumption with switched-off transmitter Operating time (with batteries) Operating time (with BA 2015 accupack) Dimensions [mm] Weight (incl. batteries) Microphones Transducer principle Sensitivity Pick-up pattern Max. SPL Microphone heads Transducer principle Sensitivity Pick-up pattern Max. SPL Color of identification ring MD 835 dynamic 1. 5 mV/Pa cardioid 150 dB SPL green MD 845 dynamic 1 mV/Pa super-cardioid 154 dB SPL blue ME 865 condenser 3 mV/Pa super-cardioid 144 dB SPL red ME 2 condenser 20 mV/Pa omni-driectional 130 dB SPL ME 3 condenser 1. 6 mV/Pa super-cardioid 150 dB SPL ME 4 condenser 40 mV/Pa cardioid 120 dB SPL SK 100 G2 typ. [. . . ]