User manual SENNHEISER EM 3532-U

[. . . ] Instructions for use EM 3532-U 38 Chapter 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Brief description, special features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Connections and operating elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Noise reduction with HiDyn plusTM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press the SET button until "Sto" briefly appears on the display. You now have to assign the frequency memory a channel number (from 001 to 255). With larger systems, it is recommended to use the same channel numbers for both transmitters and receivers in order to provide for simpler monitoring of the system. With the / buttons you can now select the desired channel number: Have you set the channel number correctly?Press the SET button until "Sto" briefly appears on the display. Only now does the receiver change to the new frequency / channel. For some countries, this menu is locked via a special configuration program, since not all tunable receiving frequencies are approved in these countries. If the "FREQUENCY" menu is selected, "Loc" appears on the display. 53 13 Deleting a receiving frequency, emptying a frequency memory You can empty a frequency memory if you enter three "hyphens" when assigning a channel number. The last frequency stored cannot be deleted. If you try to delete the last frequency stored, the display briefly indicates "LASt" and then switches back to the standard display. You can discontinue the programming of this menu by briefly (!) pressing the SET button. The display briefly indicates "ESC" and then switches back to the standard display. If you do not press any of the three programming buttons for more than 30 seconds, the setting mode is automatically left. The display briefly indicates "ESC" and then switches back to the standard display. For some countries, this menu is locked via a special configuration program, since not all tunable receiving frequencies are approved in these countries. If the "FREQUENCY" menu is selected, "Loc" appears on the display. 54 14 Setting the receiving frequency via the channel number In the "CHANNEL" menu, you can directly change from one stored receiving frequency to the next. Press the / buttons to select the "CHANNEL" menu. The "CHANNEL" display on the display panel begins to flash: The display indicates the receiving frequency in alternation with the channel number. The next channel is not necessarily identical with the next channel number assigned!The display indicates the new channel in alternation with the receiving frequency assigned. Note If you have reached the first or the last frequency memory, the display briefly indicates "EndtAb". Continue with your selection in the opposite direction. Have you selected the desired channel?Press the SET button until "Sto" briefly appears on the display. Only now does the receiver change to the new frequency / channel. 55 15 Squelch (Muting) The EM 3532 receiver is equipped with an adjustable squelch which eliminates annoying noise when the transmitters are switched on and off. It also suppresses sudden noise when a transmitter leaves the reception area and there is no longer sufficient transmitter power received by the receiver. The adjustment range is between 0 and 134 (on the display), which corresponds to 0 to up to 100 V. [. . . ] If the replacement fuse also blows, please consult a specialist who can discover the cause. We recommend you to contact your Sennheiser distributor or to send the receiver, with a precise description of the trouble, to a Sennheiser service department in your area. You can find the address of your nearest service department in the enclosed Service card or on the Internet at "http://www. sennheiser. com". 65 24 Sennheiser transmitters report their battery status Sennheiser supplies hand-held and pocket transmitters which provide information on the available transmitter battery status to the receiver. This information can be evaluated with the EM 3532 receiver. The remaining battery capacity is first indicated via the six-step bargraph on the display panel . [. . . ]