User manual SENNHEISER EK 300 IEM G2

[. . . ] W 300 IEM Instructions for use . Thank you for choosing Sennheiser! We have designed this product to give you reliable operation over many years. Over half a century of accumulated expertise in the design and manufacture of high-quality electro-acoustic equipment have made Sennheiser a world-leading company in this field. Please take a few moments to read these instructions carefully, as we want you to enjoy your new Sennheiser products quickly and to the fullest. 40 Contents The ew 300 IEM G2 system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 The channel bank system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Mode Stereo Adjusting the contrast of the graphic display SET LCD Contrast IIIIII. . . . . . . . . . Current contrast setting LCD Contrast IIIIIIIIII. . . . . . / : 16 steps SET: Stores the setting STORED SET Menu LCD Contr IIIIIIIIII. . . . . . Mode Stereo Lock Off Switching between stereo and mono operation Mode Stereo Current setting Mode Mono / : Stereo, Mono SET: Stores the setting STORED Menu Mode Lock Exit SET Mono Off Lock Off Lock mode activated or deactivated Lock On / : On, Off Lock mode = On: SET: Stores the setting, returns to standard display Activating the lock mode STORED Lock mode = Off: SET: Stores the setting Menu Lock Exit Bank SET On 3 Exiting the operating menu Bank 3 58 Operating menu of the stereo receiver EXIT SET BANK Changing the channel bank SET BANK 1 Current channel bank / BANK U : 1. . . 8, U (User Bank) SET: Stores the setting STORED CHAN Changing the channel SET 1. 01 B. CH / 1. 12 : Channel B. CH Current channel or frequency 01. . . 12 SET: Stores the setting STORED TUNE Setting the frequency for channel bank "U" SET 790. 025 MHz Current frequency on the selected channel / 791. 125 MHz : Receiving frequency in steps of 25 kHz SET: Stores the setting STORED SCAN Scanning the selected channel bank for free channels SET U. START U. / CLEAR : CLEAR, START 09 CH FREE SET Start scan = START SET: Scans the selected channel bank for free channels Delete result = CLEAR SET: Releases locked channels STORED SQELCH Setting the squelch threshold SET SQ LO Current squelch threshold / SQ HI : LO, MID, HI SET: Stores the setting STORED ST--FOC 59 SQELCH ST--FOC Switching between stereo and FOCUS operation SET STEREO Current setting / FOCUS : Stereo, Focus SET: Stores the setting STORED SET LTD Limiting the volume at the headphone output LTD. OFF OFF Limiter activated or deactivated / LTD. ON : OFF, ON SET: Stores the setting STORED HI--BST Boosting the AF frequency response SET HB. OFF OFF Frequency boost activated or deactivated / HB. ON : OFF, ON SET: Stores the setting STORED DISPLY Switching between the standard displays SET CHAN Current standard display NAME / : FREQ, NAME, CHAN SET: Stores the setting STORED NAME Assigning the receiver a name SET VOCAL Current receiver name / GUCAL : Enter a name (6 characters) Letters w/o pronounciation marks, numbers from 0. . . 9, special characters, spaces STORED RESET SET: 5 x next character, then store 60 NAME SET RESET Loading the factorypreset default settings RST. OK / : OK, NO "reset" = OK: SET: Receiver loads factory- preset default settings (only pilot tone setting is kept), receiver is restarted, standard display appears "reset" = NO SET: Reset is cancelled SET PILOT Activating/deactivating the pilot tone transmission PLT. OFF / : ON, OFF SET: Stores the setting STORED LOCK Activating the lock mode SET LOC. OFF OFF Lock mode activated or deactivated LOC. ON / : ON, OFF STORED EXIT Exiting the operation SET Lock mode = ON: SET: Stores the setting, ("STORED") returns to standard display Lock mode = OFF: SET: Stores the setting BANK BAL. L 1 Current balance setting Adjusting the balance BAL. R 15 : BAL. L 1. . . 15, BAL. --0--, BAL. R 1. . . 15 / 61 Adjustment tips for the operating menu Switching between channel banks BANK Bank Via the "Bank" menu, you can switch between the nine channel banks of the ew 300 IEM G2 transmitter and receiver. The channel banks "1" to "8" have up to 12 switchable channels that are factory-preset to a transmission/ receiving frequency (see "The channel bank system" on page 42). The channel bank "U" (user bank) also has up to 12 switchable channels to store your selection out of 1440 transmission/receiving frequencies that are freely selectable within the preset frequency range. When switching from one channel bank to another, the channel with the lowest channel number is automatically displayed. If, during the last scan of this channel bank, an interfering frequency was detected on the channel with the lowest channel number, the receiver display panel automatically displays the next free channel (see below). Switching between the channels in a channel bank CHAN Channel Via the "Channel" menu, you can switch between the channels in a channel bank. Always set the transmitter and the receiver of a transmission link to the same channel. After scanning a channel bank (see "Scanning the channel banks for free channels (receiver only)" on page 62), only the free channels are displayed. Set the transmitter to one of the free channels Selecting the frequencies to be stored in the channel bank "U" TUNE Tune Via the "Tune" menu, you can select the frequencies to be stored in the channel bank "U" (user bank). When you have selected one of the channel banks "1" to "8" and then select the "Tune" menu, the transmitter or receiver automatically switches to channel 01 of the channel bank "U". Use the / buttons to select the desired transmission or receiving frequency. Transmission and receiving frequencies are tunable in 25-kHz steps within a switching bandwidth of 36 MHz max. For intermodulationfree frequencies, please refer to the enclosed frequency table. Scanning the channel banks for free channels (receiver only) SCAN Before putting one or several transmission links into operation, you should scan the selected channel bank for free channels. 62 Starting the scan and storing the scan result Before starting the scan, switch all transmitters of your system off, since channels used by switched-on transmitters will not be displayed as "free channels". Select "START" and confirm your selection by pressing the SET button. After the scan is completed, the number of free channels is displayed. Pressing the SET button once more will store the scan result and lock all channels that are used or subject to interference. Select "CLEAR" and confirm your selection by pressing the SET button. [. . . ] Las pretensiones legales por defectos y emanadas del contrato de compraventa frente al vendedor, no quedan limitadas por esta garantia. La garantia esta disponible en todos los paises a excepción de EE. UU. , siempre que la legislación nacional aplicable no sea contraria a nuestras determinaciones de garantia. NEDERLANDS Wij hanteren voor onze producten een garantietermijn gedurende een periode van 24 maanden. Uitgezonderd hiervan zijn accessoires, accu's en batterijen die aan het product toegevoegd zijn; op grond van hun geaardheid beschikken deze producten over een kortere levensduur die van geval tot geval van hun gebruiksintensiteit afhangt. Zonder dit bewijs, dat door de Sennheiser servicepartner wordt gecontroleerd, worden reparaties in principe tegen kostenvergoeding uitgevoerd. [. . . ]