User manual SENNHEISER E905

[. . . ] · Only clean the products when they are not connected to the mains. Servicing is required if the products have been damaged in any way, liquid has been spilled, objects have fallen inside, the products have been exposed to rain or moisture, do not operate properly or have been dropped. · WARNING: To reduce the risk of fire or electric shock, do not use the products near water and do not expose them to rain or moisture. Receiver · Only use the supplied mains unit. · Unplug the mains unit from the wall socket, ­ to completely disconnect the product from the mains, ­ during lightning storms or ­ when unused for long periods of time. [. . . ] Vocal Set XSW 35 and Vocal Set XSW 65: These systems are ideal for vocal and speech applications. Headset Set XSW 52: The lightweight and comfortable headset system gives absolute freedom of movement for a more animated and impressive performance. The XS WIRELESS systems are available in five UHF frequency ranges with 960 frequencies per frequency range (except range E = 520 frequencies). Each frequency range (A, GB, B, C, E) offers 8 frequency banks with up to 12 channels each. The frequency banks contain factory-preset frequencies (frequency presets). Frequency range A Frequency range GB Frequency range B Frequency range C Frequency range E 548 to 572 MHz 606 to 630 MHz 614 to 638 MHz 766 to 790 MHz 821 to 832 MHz and 863 to 865 MHz Features · Up to 12 transmission links per frequency range which can be operated simultaneously · Reliable transmission technology · True diversity technology for minimizing dropouts in the reception · Adjustable squelch for eliminating RF interference · Rugged metal housing for EM 10 receiver · Crystal-clear reception due to dynamic processor · Sync function for wireless transmission of frequencies to transmitters · Scan function searches for unused frequencies 4 | XS WIRELESS Delivery includes Delivery includes SKM 65 radio microphone, condenser SKM 35 radio microphone, dynamic SK 20 bodypack transmitter CI 1 ¼" (6. 3 mm) jack cable ME 2-2 clip-on microphone Instruction manual 2 AA size batteries NT 2-3 mains unit XS WIRELESS systems EM 10 receiver Transmitter bag MZQ 1 stand mount 2 rod antennas ME 3 headmic Vocal Set XSW 35 Vocal Set XSW 65 Presentation Set XSW 12 Instrument Set E905 A list of accessories can be found on the XS WIRELESS product page at www. sennheiser. com. For information on suppliers, contact your local Sennheiser partner: www. sennheiser. com > "Service & Support". XS WIRELESS | 5 ZH RU PT NL ES Headset Set XSW 52 IT FR EN DE Product overview Product overview An overview of the products is given on the inside front cover of this instruction manual. A EM 10 receiver 1 2 3 4 5 6 7 8 9 Standby button Display panel UP button DOWN button button set button volume control Antenna input (ANT B), BNC socket Audio output (BALANCED), XLR-3M socket, balanced 0 Audio output (AUDIO OUT UNBALANCED) ¼" (6. 3 mm) jack socket, unbalanced A LINE/MIC slide switch B SQ rotary switch for squelch threshold C DC socket (DC 12 V, 300 mA) for connection of mains unit D Cable grip for mains cable E Antenna input (ANT A), BNC socket F Type plate B Display panel G H I J K Frequency RF signal level "RF" Audio level "AF" Battery charge status of transmitter Channel L M N O Frequency bank SYNC display SCAN, PRESET, TUNE menu items ANT A/ANT B active antenna input C SK 20 bodypack transmitter 1 Microphone/instrument input 2 mute LED, yellow (lit = muting is activated) 3 power LED, red (lit = switched on; flashing = batteries are low) 4 Antenna 5 6 7 8 9 0 A Display panel Input sensitivity slide switch button ON/OFF button Battery compartment cover Belt clip MUTE button D SKM 35/SKM 65 radio microphone 1 Sound inlet basket (SKM 35 = black 6 identification ring; SKM 65 = grey 7 identification ring) 8 2 Display panel 3 mute LED, yellow LED (lit = muting is activated) 9 4 MUTE button 0 5 Input sensitivity slide switch ON/OFF button button LED power, red LED (lit = switched on; flashing = batteries are low) Antenna cover Battery compartment 6 | XS WIRELESS Putting the XS WIRELESS systems into operation Putting the XS WIRELESS systems into operation Putting the receiver into operation You can set up the receiver as a single device or mount it into a 19" rack. rack mount "ears" and remote antennas), visit the XS WIRELESS product page at www. sennheiser. com. Furniture surfaces are often treated with varnish, polish or synthetics which might cause stains when they come into contact with other synthetics such as the device feet. Do not place the receiver on delicate surfaces; if necessary, place a pad under the receiver. Connecting the receiver to the mains Connect the connector of the mains unit to the DC socket C on the receiver. You can also synchronize a switched-off transmitter with the receiver. The transmitter automatically switches on during the synchronization process. Adjusting the squelch threshold Interference of the RF signal due to other transmission links can be eliminated as follows: Switch the transmitter off. If the receiver still receives a signal, use the rotary switch for squelch threshold "SQ" B to increase the squelch threshold so that the signal will no longer be received. If the signal cannot be eliminated in this way, set the transmitter and the receiver to a different channel. Switch the transmitter on again and check if the receiver receives the transmitter signal. If the squelch threshold is adjusted too high, the transmission range will be reduced. Therefore, always adjust the squelch threshold to the lowest possible setting. XS WIRELESS | 11 ZH RU PT NL ES IT Synchronizing a transmitter with the receiver FR EN DE Cleaning and maintaining the XS WIRELESS systems Cleaning and maintaining the XS WIRELESS systems CAUTION Liquids can damage the electronics of the products!Liquids entering the housing of the products can cause a short-circuit and damage the electronics. Only use a soft, slightly damp cloth to clean the products. If a problem occurs . . . Problem No operation indication No RF signal Cause Batteries are flat Solution Replace the batteries. 10 7 No mains connection (receiver) Check the connections of the mains unit. Transmitter and receiver are not Set transmitter and receiver to on the same channel the same channel. [. . . ] Before putting the products into operation, please observe the respective country-specific regulations. Statements regarding FCC and Industry Canada This device complies with Part 15 of the FCC Rules and with Industry Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ]