User manual SEGA UFO STOMPER
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SEGA UFO STOMPER. We hope that this SEGA UFO STOMPER user guide will be useful to you.
You may also download the following manuals related to this product:
SEGA UFO STOMPER INSTALLATION MANUAL V1 (4967 ko)
Manual abstract: user guide SEGA UFO STOMPER
Detailed instructions for use are in the User's Guide.
[. . . ] Herein, explanations which require special attention are enclosed with dual lines. Depending on the potentially hazardous degrees, the terms of DANGER, WARNING, CAUTION, etc. Be sure to understand the contents of the displays before reading the text. Indicates that mishandling the product by disregarding this pictograph will cause severe injury or death. [. . . ] The data backup period lasts for two days after power has been cut off.
26
DISPLAY CONTENT
[Current count] Total counts since the data had last been cleared are displayed. Examples include today's income, income after replacement of prizes, etc. (Data items can be cleared independently)
Current count CURRNT COUNT
Income since last clearing
Displays income count since data had last been cleared. (One unit = 25 cents) 1P: 000000 2P: 000000 current coin
Display during 1P test mode 1P CoinCount 000000 CLEAR?
11 EXPLANATION OF TEST AND DATA DISPLAY
Display during 2P test mode 2P CoinCount 000000 CLEAR?
Play count since last clearing Displays prize-out count since data had last been cleared. 1P: 000000 2P: 000000 current prize
Display during 1P test mode 1P PrizeCount 000000 CLEAR?
Display during 2P test mode 2P PrizeCount 000000 CLEAR?
27
Play count since last clearing Displays play count since data had last been cleared. Since this is the play count, the display may differ from income depending on the setting. 1P: 000000 2P: 000000 current credit
Display during 1P test mode 1P CreditCount 000000 CLEAR?
Display during 2P test mode 2P CreditCount 000000 CLEAR?
11 EXPLANATION OF TEST AND DATA DISPLAY
Payout rate since last clearing Displays rate calculated from play count and prize-out count since data had last been cleared. 1P: 000% 2P: 000% current payout
Service count since last clearing Displays number of games played using service button since data had last been cleared. 1P: 000000 2P: 000000 current service
Display during 1P test mode 1P ServiceCount 000000 CLEAR?
Display during 2P test mode 2P ServiceCount 000000 CLEAR?
28
[Total Count] Even when data has been cleared in [Current count], data in total count is not erased. Total count TOTAL COUNT
Total income count Displays total income count until backup is cleared. 1P: 000000 2P: 000000 total coin
Total prize-out count Displays total prize-out count until backup is cleared. 11-3a TABLE 11-3a Test Mode Number Test mode 1 Test mode 2 Test mode 3 Test mode 4 Operation Content UFO mechanism moves forward/backward/left/right as the lever is moved forward/backward/left/right. Prize sensor and down switch lamp can be checked.
Arm opens/closes
Moves forward/backward/left/right
Moves up/down
FIG. 11-3c
31
During test mode, the content for the small 7-seg display are as indicated below. If the limit sensor is entered or operation has just begun, "0" is displayed. TABLE 11-3b Test Mode Number Test mode 1 7-Seg Display Reads 7-seg 1 7-seg 2 7-seg 3 7-seg 4 7-seg 1 7-seg 2 7-seg 3 7-seg 4 7-seg 1 7-seg 2 7-seg 3 7-seg 4 7-seg 1 7-seg 2 7-seg 3 7-seg 4 (Down switch also lights up in response to prize sensor) Content Limit sensor LEFT Limit sensor RIGHT Limit sensor FWD Limit sensor BACK Limit sensor UP Limit sensor DOWN Open sensor Prize sensor
Test mode 2
Test mode 3
Test mode 4
11 EXPLANATION OF TEST AND DATA DISPLAY
32
12 DIP SW SETTINGS
Turn off the power supply before changing DIP SW. If the power is left on while DIP SW are changed, electrical shock may occur.
IMPORTANT
· Make sure the DIP SW that are designated to be OFF are turned OFF. If DIP SW are set to other than prescribed settings, there will be instances when behavior is not suited to actual operations. · Changed settings do not become effective until the power supply has been reactivated after changing DIP SW. · The DIP SW on the game board are not used for game settings but must all be set to OFF.
With this product, settings can be changed to those shown in the table by changing the DIP SW (DIP Switch) settings on the switch unit. DIP SW 1 adjusts coin credit settings; DIP SW 2 sets common game operations for 1P and 2P; DIP SW 3 and 4 set the game operations for 1P and 2P, respectively.
12 DIP SW SETTINGS
FIG. 12
COIN SETTINGS
DIP SW 1~4
Coin credit settings (credits awarded per coin) are set using DIP SW 1. [. . . ] Use 3 bolts on the lower side to secure the box joint bracket in place.
BOLT (6) M6x20, flat & spring washers used
PHOTO 21-5b
BOX JOINT BRACKET
80
PHOTO 21-5c
5. Unlock the ticket dispenser door using the ticket dispenser door key and open it.
Unlock.
PHOTO 21-5d 6. After detaching the cord clamp securing the ticket bin's wire harness, remove the 4 flange nuts, then remove the ticket bin.
CORD CLAMP (3)
FLANGE NUT (4) M4
PHOTO 21-5e
7. Hook the ticket dispenser box on the 3 loosely fastened bolts on the upper side, then secure them and the 2 bolts on the lower side.
OPTIONAL ITEMS 21
PHOTO 21-5g
BOLT (total 5)
PHOTO 21-5f
M6
81
8. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SEGA UFO STOMPER
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SEGA UFO STOMPER will begin.