User manual SAMSUNG VCDC20AH
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SAMSUNG VCDC20AH. We hope that this SAMSUNG VCDC20AH user guide will be useful to you.
Manual abstract: user guide SAMSUNG VCDC20AH
Detailed instructions for use are in the User's Guide.
[. . . ] • Because these following operating instructions cover various models, the characteristics of your vacuum cleaner may differ slightly from those described in this manual.
WARNING
CAUTION/WARNING SYMBOLS USED
Indicates that a danger of death or serious injury exists.
WARNING
Indicates that a risk of personal injury or material damage exists.
CAUTION
OTHER SYMBOLS USED
Represents something you must NOT do. Indicates that you must disconnect the power plug from the socket.
02_ safety information
DJ68-00665F(0. 2). indd 02
2013. 2. 6 10:53:52 AM
safety information
IMPORTANT SAFEGUARDS
1. Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of the cleaner. [. . . ] The plug must be removed from the socket outlet before cleaning or maintaining the appliance. If your vacuum cleaner is not operating correctly, switch off the power supply and consult an authorized service agent. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. Turn off the power switch before unplugging.
04_ safety information
DJ68-00665F(0. 2). indd 04
2013. 2. 6 10:53:52 AM
contents
ASSEMBLING THE CLEANER
06
OPERATING THE CLEANER
07
MAINTAIN TOOLS AND FILTER
07 07 08
ON/OFF Switch Power Cord Power-Control
09
TROUBLESHOOTING
09 10 11 12 13 14 15
Using accessory Maintain floor tools Emptying the dust bin When to clean the dust pack Cleaning the dust pack Cleaning the outlet filter Change the battery (option)
15
contents _05
DJ68-00665F(0. 2). indd 05
2013. 2. 6 10:53:53 AM
assembling the cleaner
OPTION
OPTION
•
Features may vary according to model.
•
Please do not press the button of dust bin handle when carrying machine.
•
For storage, park the floor nozzle.
06_ assembling
DJ68-00665F(0. 2). indd 06
2013. 2. 6 10:53:53 AM
operating the cleaner
ON/OFF SWITCH
02 1) BODY CONTROL TYPE 2) HANDLE CONTROL TYPE OPERATING
CAUTION
• When removing the plug from the electrical outlet, grasp the plug, not the cord.
POWER CORD
operating _07
DJ68-00665F(0. 2). indd 07
2013. 2. 6 10:53:54 AM
POWER-CONTROL
BODY-CONTROL TYPE / ON/OFF TYPE
• HOSE To reduce suction for cleaning draperies, small rugs, and other light fabrics, pull the tap air until the hole is open.
•
BODY (BODY-CONTROL TYPE ONLY) MIN = For delicate surface e. g. MAX = For hard floors and heavily soiled carpets.
HANDLE CONTROL TYPE
• HOSE Vacuum cleaner MODE (MIN/MID, MAX) Press the MODE button repeatedly to select the correct mode. (ON) MIN → MID → MAX
sender
Handle Control The cleaner is controlled by using infrared signals.
08_ operating
DJ68-00665F(0. 2). indd 08
2013. 2. 6 10:54:28 AM
maintain tools and filter
USING ACCESSORY
03
Pipe (Option)
• Adjust the length of the telescopic pipe by sliding the length control button located in the center of the telescopic pipe back and forth.
MAINTAIN
•
To check for blockages, separate the telescopic pipe and adjust to shorten. This allows for easier removal of waste clogging the tube.
Accessory
• Dusting brush for furniture. shelves, books, etc.
•
Crevice tool for radiators, crevices, corners, between cushions.
maintain _09
DJ68-00665F(0. 2). indd 09
2013. 2. 6 10:54:29 AM
MAINTAIN FLOOR TOOLS
2-Step Brush (Option)
• Adjust the inlet lever according to the floor surface. • Remove waste matter completely if the inlet is blocked.
Carpet Cleaning
Floor Cleaning
Pet Brush (Option)
For improved pick-up of pet hair and fibre on carpets. Frequent vacuuming of hair or pet fur may cause a falling-off of the rotation due to matters tangled around the drum. In this case, clean the drum with care.
Blanket brush (Option)
Clogs on turbine keep brush from turning, thus need to be unclogged as follows. Remove waste matter completely when inlet is blocked.
Turn the lock button to ‘UNLOCK’, and remove waste matter.
Turbine
Brush
To reassemble, align the cover to the front of the main body and close. After closing the cover, ensure that the lock button is turned to the ‘LOCK’ position. Be cautious not to damage brush during unclogging.
WARNING
10_ maintain
DJ68-00665F(0. 2). indd 10
2013. 2. 6 10:54:29 AM
maintain tools and filter
EMPTYING THE DUST BIN
03 MAINTAIN
1. [. . . ] • Please check filter and, if required, clean as illustrated in the instructions. • Please check filters, If required clean as illustrated in the instruction. • Please decrease power suction.
Low or decreasing suction
Body overheating Static electicity discharge
maintain _15
DJ68-00665F(0. 2). indd 15
2013. 2. 6 10:54:32 AM
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SAMSUNG VCDC20AH
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SAMSUNG VCDC20AH will begin.