User manual SAMSUNG SU4060

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SAMSUNG SU4060. We hope that this SAMSUNG SU4060 user guide will be useful to you.


SAMSUNG SU4060 : Download the complete user guide (3647 Ko)

Manual abstract: user guide SAMSUNG SU4060

Detailed instructions for use are in the User's Guide.

[. . . ] · Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot ashes. Empty dirt cup and clean filter frequently when picking up very fine materials such as powder. · Do not use to pick up flammable or combustible materials such as gasoline or fine wood, fine wood sandings or use in areas where they may be present. · Store your vacuum cleaner indoors, in a cool and dry area. 02_ safety information Safety information · Avoid picking up hard, sharp objects with the cleaner. [. . . ] 01 ASSEMBLING THE CLEANER ATTACH DUST BIN TO VACUUM Fit the groove located on the lower front side of the Dust Bin to the hook located on the vacuum body and attach the hook located on the Dust Bin Handle to the vacuum body as shown. ATTACH VACUUM HOSE AND TOOLS 1. Attach the Twist Snap Hose by lining up the taps on the base with the corresponding notches on the back of the vacuum as shown. Grasping the Hose Wand, slide the end of the it onto the Hose Wand Base. Note : The vacuum will not operate effectively unless the Hose Wand is firmly attached. Attach the Lower Cord Wrap by lining up the tab on the base with the corresponding notch on the back of the vacuum and turn it clockwise 2 as shown. Attach the Extension Wand and the Crevice Tool together into the holder on the right side of the body as shown. Attach the Combination Tool into the holder on the left side of the body as shown. Store Mini Turbo Brush on the front of the handle by lining up the Mini Turbo Brush base with the base of the holder then push back to snap into place. 2 1 *Option assembling the cleaner _07 Operating the cleaner POWER SWITCH The Power Switch is located on the side of the vacuum. Push the rocker switch "ON" to vacuum, and "OFF" when cleaning is complete. HANDLE POSITIONS Press the handle release pedal, located on the lower left side of the vacuum, with your foot to place your vacuum into one of three cleaning positions. Low Cleaning - With the vacuum in normal cleaning position, press handle release pedal again. Use for reaching under low furniture such as tables, chairs or beds. HEIGHT ADJUSTMENT The Powerfoot/Rotating Floor Brush can be adjusted to clean several floor surfaces. Note : For optimal cleaning performance, adjust to the lowest practical setting. If your cleaner is difficult to push, adjust to the next higher setting. Always ensure that the correct height setting is used for your flooring type as damage may occur if the height setting is not changed to reflect your flooring type. To move your cleaner from room to room, put the Handle in the upright position, tilt the cleaner back on its rear wheels and push forward. The cleaner can also be moved by using the Carrying Handle located on the top of the Dust Bin. 08_ operating the cleaner Carrying Handle Operating the cleaner SPECIAL ON-BOARD TOOLS Your vacuum is not only a powerful carpet and rug cleaner, it's also a versatile above floor vacuum cleaner when you select one of the special tools. Grasp the end of the Hose Wand and lift Hose Wand to separate from the Hose Wand Base. 02 OPERATING THE CLEANER Combination Dusting Brush/ Upholstery Tool: Two Types of cleaning tools are included in one attachment : rotate for desired tool. · Use Brush side to dust furniture, blinds, books, lamps, shelves, and baseboards. · Use Upholstery side for curtains, draperies, cushions, fabrics. Quick Release Cord Wrap Power Cord Crevice Tool Extension Wand Combination Dusting Brush/ Upholstery Tool Hose Wand Crevice Tool: Use in tight narrow spaces. Extension Wand: Use with desired attachment for a longer reach. Hose Wand Base Mini Turbo Brush (Select Models): Use rotating brush action for small areas such as stairs and upholstery. *option Select Models Only Note : Press gently when using Mini Turbo Brush to gain maximum cleaning. Too much pressure could cause the brush to stop rotating. POWER CORD STORAGE 1. To use your vacuum, remove the cord and plug it into an electrical outlet. [. . . ] If properly installed, Drive Belt will center itself on Rotating Brush crown. Insert the hook on the Brush Cover into the corresponding groove on the brush and tighten scerws securely. WARNING Hook Be careful of your hands when you replace the drive belt, to avoide physical injury from sharp plastic film. 12_ maintenance Maintenance MINI TURBO BRUSH Brushbar Replacement 1. With the curved ends facing down, slide end plates of brushbar into slots on the tool. To replace bottom plate, insert the four tabs on edge of bottom plate into slots on front of tool. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SAMSUNG SU4060




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SAMSUNG SU4060 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.