User manual SAMSUNG SP2514N-MK2

[. . . ] Because the product has been already optimized with its own configurations. First of all, you must partition and format for recognizing the new drive in the Windows Explorer. When installing Win2000 or Win-XP, the installation process includes the new drive in the Windows Explorer. To open the Disk Management 1 Click Start, point to Settings, and then click Control Panel. [. . . ] 3 In the left panel, expand Storage, and then expand Disk Management. SAMSUNG ELECTRONICS CO. , LTD. STORAGE SYSTEM DIVISION HEAD OFFICE: 94-1, IM SOO-DONG, GUMI-CITY KYUNG BUK, KOREA 730-350 FAX : 82-54-479-55673. Making Computer Detect the New Device This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. Push them in straight until they are seated. FAQs Q1 Q2 If your computer's maximum support level is under 32 GB: HDD does not be recognized in BIOS setup. Even though the HDD recognized in BIOS setup, it does not be seen in Windows. 2 Partition can be created through the Fdisk or Installing OS according to OS's version. One is a hardware barrier which some motherboards do not support 48 bit LBA. The other is a software barrier which Windows2000 and Windows XP do not support larger than 137GB. Please refer below URLs for recognizing larger than 137GB in the software barrier. For download the SP3 for Win2000: www. microsoft. com/windows2000/downloads/servicepacks/sp3/default. asp For editing the registry for Win2000: http://support. microsoft. com/default. aspx?scid=kb;en-us;305098 For download the SP1 for Win-XP: www. microsoft. com/WindowsXP/pro/downloads/servicepacks/sp1/default. asp Set as Master (AB + CD) Set as Slave (CD) Select Cable (CD + EF) Do Not Connect In Reverse !! Installation Your Hard Drive Note: - Turn off the system power !- Cover opening mechanism and the location of the hard disk drive may vary from one computer to another. 1. Making Computer Detect the New Device Note: Run the CMOS (BIOS) set-up program to detect the new hard disk drive. Q3 1 2 1 2 Note: In some rare cases SATA 1. 5Gb/s hosts can not establish SATA interface connection with SATA 3. 0Gb/s devices due to interface protocol issues. [. . . ] Making Computer Detect the New Device Note: Run the CMOS (BIOS) set-up program to detect the new hard disk drive. Q3 1 2 1 2 Note: In some rare cases SATA 1. 5Gb/s hosts can not establish SATA interface connection with SATA 3. 0Gb/s devices due to interface protocol issues. In this case you should switch your drive to SATA 1. 5Gb/s speed with a software which we are providing via www. samsunghdd. com. Turn off the computer, unplug the external cables, and open computer cover. Mount the hard disk drive in the designated place in the computer with screws provided with the product. [. . . ]