User manual SAMSUNG SP-A8000

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SAMSUNG SP-A8000. We hope that this SAMSUNG SP-A8000 user guide will be useful to you.


SAMSUNG SP-A8000 : Download the complete user guide (2182 Ko)

You may also download the following manuals related to this product:

   SAMSUNG SP-A8000 (2143 ko)
   SAMSUNG SP-A8000 (2148 ko)

Manual abstract: user guide SAMSUNG SP-A8000

Detailed instructions for use are in the User's Guide.

[. . . ] SP-A8000 DLP Projector Owner's Instructions The color and the appearance of the product may differ from the illustrations in this manual. The specifications are subject to change without prior notice to improve performance. Table Of Contents MAJOR SAFETY PRECAUTIONS Before You Start . 2-10 Connecting a DVD player/Cable Box/Satellite Box via Component 2-11 Connecting to VCR/Camcorder . 5-4 1 1-1 Major Safety Precautions Before You Start Icons used in this manual ICON NAME Caution MEANING Indicates cases where the function may not work or the setting may be canceled. Note Indicates a hint or tip to operate a function. Using this Manual · · · The contents of this manual are subject to change without prior notice for performance improvement. [. . . ] Move( ) / ENTER Buttons OFF ( ) Button Used to turn off the projector. LIGHT ( ) Button Use to check source signals, picture setup, PC screen adjustment, and lamp lifespan. D. BLACK button Used to adjust the screen brightness and contrast by adjusting the iris in the optical system. P. INFO Button Use to check source signals, picture setup, PC screen adjustment, and lamp lifespan. INSTALL Button Used to flip or reverse the image so that it is appropriate for the projector's installation location (In front of the screen and hanging from the ceiling, behind the screen and hanging from the ceiling, etc. ) Used to move to or select each menu item. INFO Button Used to view information about the current input mode (external input signal). STILL Button Used to see still images. P. MODE Button Used to select Picture Mode. · · Make sure to place your remote control on a table or desk. - If you step on the remote control, you may fall and hurt yourself or damage the remote. We recommend you use your remote control: - No more than10m (32. 8 ft) from the remote control signal receiver - At an angle of no more than 30° to the left or right of the remote control signal receiver Using 3-4 Installing Batteries in the Remote Control 1. Lift the cover at the back of the remote control upward as shown in the figure. 2. Close the cover. 3-4 Using 3-5 LED Indications LED Indications :Light is On STAND BY :Light is Blinking LAMP :Light is Off TEMP INFORMATION If you press the POWER button on the remote control or projector, the screen appears within 30 seconds. This state appears when the projector is preparing an operation after the POWER button on the projector or the remote control has been pressed. The POWER button is pressed to turn off the projector, and the cooling system is in operation to cool off the inside of the projector. (Lasts for about 1 minute) The cooling fan inside the projector is not operating normally. The temperature inside the projector has risen beyond the control limit. A problem has occurred with the operaton of the color wheel in the product. Refer to Action 4 on the next page. Using 3-5 Clearing Indicator Problems CLASSIFICA TION Action 1 STATE When the cooling fan system is not in normal operating condition. When the lamp cover protecting the lamp unit is not properly closed or the sensor system is not in normal operating condition. When temperature inside of the projector becomes too high. MEASURES If the symptom remains even after you disconnect and then reconnect the power cord and turn the projector on again, contact a Samsung service center. Confirm that the screws in the projector lamp cover are tightly fastened. If they are, contact your dealer or service center. Action 2 Action 3 Refer to the Installation Related Warnings in the front of this manual and adjust the installation of your projector accordingly. If the same problem occurs continually, contact a Samsung service center. [. . . ] Class A is for business while class B emits less electromagnetic waves than class A. The DMD panel used for Samsung projectors is made of hundreds of tiny mirrors. As with other visual display elements, the DMD Panel may include a few bad pixels. Samsung and the DMD Panel manufacturer have a rigid, bad pixel identification and limitation procedure in place and products will not exceed the maximum number of bad pixels set by our standards. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SAMSUNG SP-A8000




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SAMSUNG SP-A8000 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.