User manual SAMSUNG SLC410W

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SAMSUNG SLC410W. We hope that this SAMSUNG SLC410W user guide will be useful to you.


SAMSUNG SLC410W : Download the complete user guide (23094 Ko)

You may also download the following manuals related to this product:

   SAMSUNG SLC410W (25649 ko)
   SAMSUNG SLC410W (11636 ko)
   SAMSUNG SLC410W (25649 ko)
   SAMSUNG SLC410W (27204 ko)

Manual abstract: user guide SAMSUNG SLC410W

Detailed instructions for use are in the User's Guide.

[. . . ] Introduction Key benefits Features by models Useful to know About this user’s guide Safety information Machine overview Control panel overview Turning on the machine Installing the driver locally Reinstalling the driver 4 6 9 10 11 17 20 21 22 23 Available maintenance parts Storing the toner cartridge Redistributing toner Replacing the toner cartridge Replacing the waste toner container Replacing the imaging unit Cleaning the machine Tips for moving & storing your machine 4. Troubleshooting Tips for avoiding paper jams Clearing paper jams Understanding the status LED 57 58 62 2. Introduction This chapter provides information you need to know before using the machine. € Key benefits • Features by models • Useful to know • About this user’s guide • Safety information • Machine overview • Control panel overview • Turning on the machine • Installing the driver locally • Reinstalling the driver 4 6 9 10 11 17 20 21 22 23 Key benefits Environmentally friendly • Fast, on-demand printing. [. . . ] select Open System or Shared Key for the authentication and click Next. € WEP (Wired Equivalent Privacy) is a security protocol preventing unauthorized access to your wireless network. WEP encrypts the data portion of each packet exchanged on a wireless network using a 64-bit or 128-bit WEP encryption key. Before entering the IP address for the machine, you must know the computer’s network configuration information. If the computer’s network configuration is set to DHCP, the wireless network setting should also be DHCP. Likewise, if the computer’s network configuration is set to Static, the wireless network setting should also be Static. If your computer is set to DHCP and you want to use Static wireless network setting, you must contact the network administrator to get the static IP address. € For the DHCP method If the IP address assignment method is DHCP, check if DHCP is shown in the Wireless Network Setting Confirm window. If it shows Static, click Change TCP/IP to change the assignment method to Receive IP address automatically (DHCP). € For the Static method If the IP address assignment method is Static, check if Static is shown in the Wireless Network Setting Confirm window. If it shows DHCP, click Change TCP/IP to enter the IP address and other network configuration values for the machine. For example, If the computer’s network information is shown as follows: - IP address: 169. 0 Then, the machine’s network information should be as shown below: - IP address: 169. Using a network-connected machine 129 Wireless network setup 13 When the window that tells you that the network cable connection is confirmed appears, disconnect the network cable and click Next. If the network cable is connected, it may have trouble finding the machine when configuring the wireless network. € After completing the wireless network connection, you need to install a machine driver to print from an application (see "Installing driver over the network" on page 99). € See your network administrator, or the person that set up your wireless network, for information about your network configuration. 14 15 The wireless network connects according to the network configuration. Items to prepare • • • • Access point Network-connected computer Software CD that was provided with your machine A machine installed with a wireless network interface Network cable After completing the wireless network connection, you need to install a machine driver to print from an application (see "Installation for Mac" on page 90). 17 • Using a network cable Printing a network configuration report Machines that do not support the network interface will not be able to use this feature (see "Rear view" on page 19). You can identify the network settings of your machine by printing a network configuration report. To enable your machine to work with your network, you will need to perform some configuration procedures. [. . . ] Toner is a powder used in laser printers and photocopiers, which forms the text and images on the printed paper. Toner can be fused by a combination of heat/pressure from the fuser, causing it to bind to the fibers in the paper. glossary 227 Glossary TWAIN An industry standard for scanners and software. By using a TWAIN-compliant scanner with a TWAIN-compliant program, a scan can be initiated from within the program. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SAMSUNG SLC410W




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SAMSUNG SLC410W will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.