User manual SAMSUNG LE32A553

[. . . ] Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. To receive more complete service, please register your product at Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. [. . . ] You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke. Programme You can select a channel of the sub-picture only when the "Source" is set to "TV". Mode: Standard/Music/Movie/Speech/Custom You can select the type of special sound effect to be used when watching a given broadcast. Equalizer: balance/100hz/00hz/1khz/khz/10khz The sound settings can be adjusted to suit your personal preferences. If you make any changes to these settings, the sound mode is automatically switched to "Custom". TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. Auto Volume: Off/On Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. TV Speaker: Off/On If you want to hear the sound through separate speakers, cancel the internal amplifier. The +, - and MUtE buttons do not operate when the "TV Speaker" is set to Off. When "TV Speaker" is set to "Off", you can operate only "Sound Select" (in PIP mode) in Sound menu. Sound Select: Main/Sub When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture. When you set to "Dual I-II", the current sound mode is displayed on the screen. If the stereo signal is weak and an automatic switching occurs, then switch to the Mono. You can connect a set of headphones to your set if you wish to watch a tV programme without disturbing the other people in the room. When you insert the head set jack into the corresponding port, you can operate only "Auto Volume" and "Sound Select"(in PIP mode) in Sound menu. You will not receive sound from the speakers when you connect headphones to the system. You can set the tV's clock so that the current time is displayed when you press the INFO button. You must also set the time if you wish to use the automatic On/Off timers. You can also set "Year", "Month", "Day", "Hour" and "Minute" by pressing the number buttons on the remote control. You can select a time period of between 0 and 10 minutes after which the television automatically switches to standby mode. Programme : When the On Timer is active, you can turn on a specific channel. [. . . ] For installation, refer to the Installation Manual provided with the wall mount. For product installation and the installation and moving of the wall mount, make sure to consult a specialized installation company. This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building materials, please contact your nearest dealer. [. . . ]