User manual QUANTUM PX500 TAPE DRIVE INSTALLATION INSTRUCTIONS 81-81301-01 B01
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual QUANTUM PX500 TAPE DRIVE INSTALLATION INSTRUCTIONS 81-81301-01 B01. We hope that this QUANTUM PX500 TAPE DRIVE INSTALLATION INSTRUCTIONS 81-81301-01 B01 user guide will be useful to you.
Manual abstract: user guide QUANTUM PX500 TAPE DRIVE INSTALLATION INSTRUCTIONS 81-81301-01 B01
Detailed instructions for use are in the User's Guide.
[. . . ] Quantum PX500 Series Library Tape Drive Installation Instructions
Introduction
3
Tape Drive Numbering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Upgrade Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Required Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Unpacking the Tape Drive Installing the Tape Drives Cabling the Tape Drives Setting the Tape Drive SCSI ID
7 7 8 11
Setting the SCSI ID Using the OCP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Setting the SCSI ID from the Remote Management Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
81-81301-01 B01, May 2005
1
Quantum PX500 Series Tape Drive Installation Instructions 81-81301-01 B01 May 2005
2
Quantum PX500 Series Tape Drive Installation Instructions 81-81301-01 B01 May 2005
Introduction
0
This document provides instructions for adding a tape drive to an Quantum PX500 Series tape library. The tape drive upgrade procedure consists of the following steps: · · · · Unpacking the Tape Drive Installing the Tape Drives Cabling the Tape Drives Setting the Tape Drive SCSI ID
Tape Drive Numbering 0
The Quantum PX500 Series tape library may contain up to 10 tape drives depending on the library model. [. . . ] 5 Repeat steps 1 through 4 to install another tape drive in a different location, if desired.
Unpacking the Tape Drive
7
Quantum PX500 Series Tape Drive Installation Instructions 81-81301-01 B01 May 2005
Figure 4 Installing a Tape Drive
Tape drive 1
Captive screw
Tape drive 2 PX502 shown Captive screw
Proceed to Cabling the Tape Drives.
Cabling the Tape Drives
After the tape drive(s) have been installed, you must connect SCSI cables to each drive. To cable the tape drives:
0
1 Connect the host computer(s) to the library and tape drives as shown in figure 5 for a PX502 library, figure 6 for a PX506 library, and figure 7 for a PX510 library.
8
Cabling the Tape Drives
Quantum PX500 Series Tape Drive Installation Instructions 81-81301-01 B01 May 2005
Figure 5 Cabling the Tape Drives in a PX502 Library
Host computer
SCSI terminator
SCSI jumper cables
Figure 6 Cabling the Tape Drives in a PX506 Library
SCSI jumper Host computer
SCSI jumper
Host computer SCSI terminators SCSI jumper
Host computer SCSI jumper
Cabling the Tape Drives
9
Quantum PX500 Series Tape Drive Installation Instructions 81-81301-01 B01 May 2005
Figure 7 Cabling the Tape Drives in a PX510 Library
SCSI jumper SCSI jumper
Host computer
Host computer
SCSI jumper
Host computer
SCSI terminators
SCSI jumper
Host computer
SCSI jumper
Host computer
10
Cabling the Tape Drives
Quantum PX500 Series Tape Drive Installation Instructions 81-81301-01 B01 May 2005
Setting the Tape Drive SCSI ID
The next step in the installation procedure is to set the required SCSI ID for the new tape drive. It is only necessary to perform the steps in this section if you need to set the tape drive SCSI ID to an ID other than the default.
0
There are two ways to set the tape drive SCSI ID: · · Setting the SCSI ID Using the OCP Setting the SCSI ID from the Remote Management Pages
Setting the SCSI ID Using the OCP
To set the tape drive SCSI ID on an PX500 Series library with an LCD:
0
1 From the operator control panel (OCP), press Setup from the Home screen. The OCP displays the Setup screen (see figure 8):
Figure 8 Setup Screen
Enter
2 Use the up and down arrows to highlight Cabinet and press Enter. The Cabinet screen displays (see figure 9):
Figure 9 Library Options Screen
3 Use the up and down arrows to highlight Host bus and press Enter. The Host bus screen displays (see figure 10):
Setting the Tape Drive SCSI ID 11
Quantum PX500 Series Tape Drive Installation Instructions 81-81301-01 B01 May 2005
Figure 10 Host Bus Options Screen
4 Use the up and down arrows to highlight the tape drive receiving the new SCSI ID and press Enter. 5 Use the up and down arrows to select a SCSI ID and press Enter to set the ID. 6 When you have completed setting the SCSI IDs, press Exit to return to the Cabinet screen. 7 From the Ops screen, use the up and down arrows to highlight Drive Operations and press Enter. The Drive Operations screen displays (see figure 11):
Figure 11 Drive Operations Screen
8 Use the up and down arrows to select a tape drive and press Enter. The tape drive powers down and returns to the Drive Operations screen. The tape drive installation is complete.
Setting the SCSI ID from the Remote Management Pages 0
To set the tape drive SCSI ID on a PX500 Series library from the remote management pages: Note: The library must be off-line during this procedure.
1 On the host computer, open the internet browser software. [. . . ] 10 Enter the new tape drive number 11 Select Power on and click Apply. The tape drive installation is complete.
14
Setting the Tape Drive SCSI ID [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE QUANTUM PX500 TAPE DRIVE INSTALLATION INSTRUCTIONS 81-81301-01 B01
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual QUANTUM PX500 TAPE DRIVE INSTALLATION INSTRUCTIONS 81-81301-01 B01 will begin.