User manual PROEL FREE50V2

[. . . ] Heat: This apparatus should be placed away from heat sources, like radiators, heat registers, stoves or other products (including amplifiers) that produce heat. power sources: · This apparatus should be connected only to power source type specified in this owner's manual or on the unit. If the supplied AC power cable plug is different from wall socket, please contact an electrician to change the AC power plug. grounding or Polarization: · All precautions must be observed in order to avoid grounding or polarization defeating. [. . . ] Don't open the unit, there are no user serviceable parts inside. If you detect a particular smell from the unit, please immediately turn it off and disconnect the AC power cord. To obtain good speakers wire contacts, please tighten the screw terminals firmly. This unit should be placed in a rack (see INSTALLATION) and kept far from: Wet places Direct exposure to heat sources (like sun light) Non properly ventilated places Disconnect the power cord during storms or when the unit is not used. In order to prevent fire and electric shock risks, it's necessary to keep the unit far from sprinkling and drops. Please don't put cups, vases or other object containing liquids over the unit. In case of interferences from source signal, THD value will raise over 10%. Don't place this unit in a bookshelf o in other places with small room. Is not responsible for any damage that occurs due to a wrong unit installation. Thank you for choosing one of Proel products, and for your confidence towards our brand, synonymous of professionalism, accuracy, high quality and reliability. All our products are CE approved and designed for continuous use in professional installation systems. DESCRIPTION FREE50V2 unit is Proel answer to the continuous increase demand of audio autonomous portable systems. System dedicated to voice and music sound reinforcement in ambient where there is no voltage power supply source or cable connections difficulties due to length to be covered between the power source and the unit to be powered. FREE50V2 is a complete portable amplified system featuring high acoustic performance and is two ways loudspeakers and 50W RMS amplifier equipped. Such unit is suitable for voice sound reinforcement during conferences, exhibitions, sportive or religious events etc. FREE50V2 is VHF wireless microphone system and quartz equipped to ensure High frequency stability level to allow orator free movements . FREE50V2 is DVD/CD/MP3/USB/SD MMD card, AM/FM tuner, three microphone inputs, one AUX input dedicated to external source one output for recording purposes or for twin acoustic cabinet piloting. The internal rechargeable battery has been designed to ensure a good operating autonomy whilst the unit weight has been contained to easy the unit transportable purposes. FREE50V2 acoustic cabinet is trolley strong extensible handle equipped for portable need whilst the dedicated flange set on bottom of the unit allows stand floor use. main functions: N° 2 VHF palmar wireless microphone included in the standard unit package. Three microphone inputs , one AUX input and one high level LINE output. ON/OFF power switch connection for power supply cable and main voltage value variation Activation charge function indicator Power On status/ battery discharge indicator CD/MP3/USB/SD MMD card player ­ AM/FM tuner VHF wireless microphone receivers module XLR microphone inputs Microphone inputs level control LINEA/AUX input and Video Output LINE/AUX input level control CD player ­Tuner level control Tone control ECHO effect control LINE/TAPE/REC output. [. . . ] Such microphones can operate contemporaneously or in miscellaneous with two wireless microphones included in the standard supply. Auxiliary input and line output FREE50V2 can be connected to an auxiliary and external source so as a CD player or recorder/reproduced using the appropriate RCA input (fig. 15) to pilot an external amplifier or other amplified acoustic cabinet FREE50V2 connecting with JACK mono/RCA line cable the line output of one LINE with the input of the second line. For such purposes FREE50V2 , thanks to its fixing flange, can be set on the floor tripod -part reference (PA SPSK290BK) . [. . . ]