User manual PROEL FREE50

[. . . ] Heat: This apparatus should be placed away from heat sources, like radiators, heat registers, stoves or other products (including amplifiers) that produce heat. power sources: · This apparatus should be connected only to power source type specified in this owner's manual or on the unit. ⷠIf the supplied AC power cable plug is different from wall socket, please contact an electrician to change the AC power plug. grounding or Polarization: · All precautions must be observed in order to avoid grounding or polarization defeating. [. . . ] This unit should be placed in a rack (see INSTALLATION) and kept far from: Wet places Direct exposure to heat sources (like sun light) Non properly ventilated places Disconnect the power cord during storms or when the unit is not used. In order to prevent fire and electric shock risks, it's necessary to keep the unit far from sprinkling and drops. Please don't put cups, vases or other object containing liquids over the unit. In case of interferences from source signal, THD value will raise over 10%. Don't place this unit in a bookshelf o in other places with small room. Is not responsible for any damage that occurs due to a wrong unit installation. Thank you for choosing one of Proel products, and for your confidence towards our brand, synonymous of professionalism, accuracy, high quality and reliability. All our products are CE approved and designed for continuous use in professional installation systems. DESCRIPTION FREE50 unit is Proel answer to the continuous increase demand of audio autonomous portable systems. System dedicated to voice and music sound reinforcement in ambient where there is no voltage power supply source or cable connections difficulties due to length to be covered between the power source and the unit to be powered. FREE50 is a complete portable amplified system featuring high acoustic performance and is two ways loudspeakers and 50W RMS amplifier equipped. Such unit is suitable for voice sound reinforcement during conferences, exhibitions, sportive or religious events etc. FREE50 is VHF wireless microphone system and quartz equipped to ensure High frequency stability level to allow orator free movements . fREE50 is CD/MP3 , AM/FM tuner , three microphone inputs , one AUX input dedicated to external source one output for recording purposes or for twin acoustic cabinet piloting. The internal rechargeable battery has been designed to ensure a good operating autonomy whilst the unit weight has been contained to easy the unit transportable purposes. FREE50 acoustic cabinet is trolley strong extensible handle equipped for portable need whilst the dedicated flange set on bottom of the unit allows stand floor use. main functions: N° 2 VHF palmar wireless microphone included in the standard unit package. Three microphone inputs , one AUX input and one high level LINE output. ON/OFF power switch connection for power supply cable and main voltage value variation Activation charge function indicator Power On status/ battery discharge indicator CD/MP3 player ­ AM/FM tuner VHF wireless microphone receivers module XLR microphone inputs Microphone inputs level control LINEA/AUX input LINE/AUX input level control CD player ­Tuner level control Tone control DELAY effect control ECHO effect control LINE/TAPE/REC output. FIRST USE Once the unit unpacked , the battery must be recharged for 8/10 hours before the first use. The internal battery is charged in the factory but the warehousing purposes can reduce the charge level and modify charge autonomy duration indication. FREE50 can be used whilst under battery charge operation, AC voltage power supply can ensure both battery charge and unit operating mode. [. . . ] When led lights, it indicates, independently of light colour , the battery discharge Mute key Microphone capsule 3), For use the necessary steps are as follows: · Power on the wireless microphone, the relevant RF led will light indicating that the receiver is synchronized to transmitter frequency range (fig. CONNECTIONS AND USE OF AMPLIFIED ACOUSTIC CABINET Main power supply FREE50 has been designed for 230-117VCA 50/60Hz main power supply. Use such cable to connect to the main power source setting the subsequently the power ON commutator on position AC, FREE50 is ready to operate powered by the main power supply source. The main power supply unit is protected by the appropriate fuse located in the main power supply plug (fig. [. . . ]