User manual PIONEER VSA-E07
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PIONEER VSA-E07. We hope that this PIONEER VSA-E07 user guide will be useful to you.
You may also download the following manuals related to this product:
PIONEER VSA-E07 (3538 ko)
PIONEER VSA-E07 (3396 ko)
PIONEER VSA-E07 (3393 ko)
PIONEER VSA-E07 (3389 ko)
PIONEER VSA-E07 (3400 ko)
PIONEER VSA-E07 (3332 ko)
PIONEER VSA-E07 (3359 ko)
PIONEER VSA-E07 (5986 ko)
PIONEER VSA-E07 (5955 ko)
Manual abstract: user guide PIONEER VSA-E07
Detailed instructions for use are in the User's Guide.
[. . . ] AUDIO/VIDEO MULTI-CHANNEL AMPLIFIER
VSA-E07
Operating Instructions
IMPORTANT 1
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
IMPORTANT 2
FOR USE IN THE UNITED KINGDOM
The wires in this mains lead are coloured in accordance with the following code : Blue : Neutral Brown : Live If the plug provided is unsuitable for your socket outlets, the plug must be cut off and a suitable plug fitted.
The cut-off plug should be disposed of and must not be inserted into any 13 amp socket as this can result in electric shock. The plug or adaptor or the distribution panel should be provided with 5 amp fuse. [. . . ] If you connected one of these components match this button to the component. If starting fresh, complete steps 1-3 in "Setting Up for Surround Sound" (p. 26) first.
1
System Setup
SPEAKER SETTING CHANNEL DELAY CHANNEL LEVEL CROSSOVER NETWORK EXIT BASS PEAK LEVEL MANAGER DYNAMIC RANGE CONTROL DIGITAL INPUT SELECT
1 2
Press the DIGITAL INPUT SELECT button. Each further press scrolls through the possible components (functions) you can choose from. Select the component you hooked up to that digital input with that number.
This procedure assigns a digital function to the DIGITAL IN. Once one function (for example DVD/LD) has been assigned its name disappears from the possibilities on the remaining buttons because one function cannot be assigned twice. If a digital jack has nothing connected to it set the corresponding button to OFF.
2, 3
3
Digital Input Select
DIGITAL IN 1 DIGITAL IN 2 DIGITAL IN 3 DVD/LD DIGITAL IN 4 TV/SAT CD AC-3 RF DVD/LD SETUP OK MD
Repeat step 2 until all the digital in buttons correspond to the components you connected. If you hooked up a DVD/LD or LD player to the AC-3 RF channel choose the proper component with the same method described above.
4
4
36
En
Initial Set Up
Digital Input Select
DIGITAL IN 1 DIGITAL IN 2 DIGITAL IN 3 DVD/LD DIGITAL IN 4 TV/SAT CD AC-3 RF DVD/LD SETUP OK MD
5
Press the SETUP OK button to return the SYSTEM SETUP menu.
Hold the remote control pointed towards the amplifier until you see the "RECEIVED" display on the amplifier. If "ERROR" flashes in the display, perform the setup operations from the first step again.
SIGNAL SELECT
ANALOG SP A
VOLUME
dB
5
These settings will be displayed on your TV. (The settings pictured here are the default settings. ) The remaining possible choices for the digital inputs are shown in the diagram on the right.
Digital Input Select
DIGITAL IN 1 DIGITAL IN 2 DIGITAL IN 3
Digital In-Select Digital-1 Digital-2 Digital-3 Digital-4 AC-3 RF L [DVD/LD] [ CD ] [ MD ] [TV/SAT ] [DVD/LD]
SET UP
DVD/LD DIGITAL IN 4 TV/SAT
CD AC-3 RF DVD/LD
MD
SETUP OK
· For the DIGITAL IN 1-4 buttons you can choose between DVD/LD, CD, TV/SAT, MD/TAPE 1, LINE/TUNER, VCR 1 and VCR 2 functions. · For the AC-3 RF button you can choose between DVD/LD, TV/SAT, VCR 1 and VCR 2 functions. Remember, if you have a DVD/LD player or LD player you should hook it up to the analog and digital jacks in addition to the AC-3 RF connection described here.
37
En
Basic Playback
Before operating the amplifier, be sure to press the main power button on the front panel to turn the power ON (_).
Playing Source with Stereo Sound
The following instructions show you how to play audio or audio-visual sources with the VSA-E07. If the TAPE 2 indicator is visible in the display, it means the TAPE 2 MONITOR is on. Press TAPE 2 MONITOR on the front panel to turn it off unless you want to listen to TAPE 2.
on off BACK LIGHT
4
TV CONTROL
AMP REMOTE SETUP
FUNCTION
1 2
Turn on the power of the playback component. Press the STANDBY/ON button to turn on the amplifier.
Be sure that the standby indicator turns off on the front panel.
STANDBY indicator
DVD/LD
MD/TAPE1
CH TV/SAT CD CH VOL VCR1 LINE/ TUNER VOL VCR2 TV CONTROL
+ +
FUNCTION
3
MASTER VOLUME MULTI SYSTEM OPERATION OFF
STANDBY/ON
MUTING
+
ENTER
2
on off BACK LIGHT TV CONTROL
REMOTE SETUP
FUNCTION
3
Press the FUNCTION button to select the source you want to playback.
The FUNCTION button cycles through the sources in the following order:
DVD/LD TV/SAT VIDEO CD MD/TAPE 1 LINE/ TUNER
AMP
Amplifier
DSP
MAIN STEREO
SUB
DVD/LD
MD/TAPE1
6
4
VCR 2
VCR 1
PHONO
/ dts
TV/SAT
EFFECT
CD
CH CH VOL LINE/ TUNER VOL TV CONTROL
+ +
THX MIDNIGHT DIGITAL NR
ADVANCED STANDARD THEATER
MPEG
VCR1
DIRECT LOUDNESS
Press the AMP button.
The Amplifier MAIN screen appears on the remote.
VCR2
SIGNAL SELECT
FUNCTION
5
MASTER VOLUME MULTI SYSTEM OPERATION OFF
STANDBY/ON
MUTING
+
5
ENTER
Press the SIGNAL SELECT button to select the input signal corresponding to the source component (setting the switch to AUTO assures the proper signal will be selected).
(See "Switching ANALOG/DIGITAL signal input" on p. 45. )
2
6
5
3
6
Press the STEREO button to select the STEREO mode.
The STEREO indicator lights on the display.
Main power button
38
En
Basic Playback
on off BACK LIGHT
AMP
Amplifier
DSP
MAIN STEREO
SUB
TV CONTROL
REMOTE SETUP
FUNCTION
7 8
Start playback of the component you selected in step 1. Adjust the volume by using the MASTER VOLUME buttons on the remote control or the MASTER VOLUME on the front panel.
Return to the Amplifier screens (by pressing to AMP button and SUB, if needed) to make other sound adjustments like bass/treble, loudness etc. If you are not able to get sound from the amplifier the problem may well lie with the SIGNAL SELECT switch. You need to make sure the input is set to the appropriate ANALOG or DIGITAL setting. Refer to page 45 for more on this.
DVD/LD
MD/TAPE1
/ dts
TV/SAT
EFFECT
CD
CH CH VOL LINE/ TUNER VOL TV CONTROL
+ +
THX MIDNIGHT DIGITAL NR
ADVANCED STANDARD THEATER
MPEG
VCR1
DIRECT LOUDNESS
VCR2
SIGNAL SELECT
FUNCTION
MASTER VOLUME MULTI SYSTEM OPERATION OFF
STANDBY/ON
MUTING
+
ENTER
8
8
OPERATION
39
En
Basic Playback
Sound Modes
The six sound modes on the VSA-E07 are explained here. These can be turned on from the front panel or from the Amplifier MAIN screen on the remote control. There are four cinema modes: MPEG, STANDARD, HOME THX CINEMA, and ADVANCED THEATER. These are designed to be used with multi channel surround sound audio/visual sources (like DVDs and LDs). Intrinsic to home theater, these modes can deliver realistic and powerful surround sound that recreates the movie theater experience. [. . . ] 92/65 dB Frequency Response VCR 1/DVR, VCR 2, VIDEO, DVD/LD, TV/SAT Luminance signal (Y) . . . . . . . . . . . . . . 5 Hz to 10 MHz +0 dB 3 Signal-to-Noise Ratio Luminance signal (Y) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 dB Isolation (3. 58 MHz) Y=C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 dB C=Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PIONEER VSA-E07
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PIONEER VSA-E07 will begin.