Detailed instructions for use are in the User's Guide.
[. . . ] PLASMA DISPLAY SYSTEM
PRO-1130HD PRO-930HD
Register Your Product on
www. pioneerelectronics. com (US) www. pioneerelectronics. ca (Canada)
Operating Instructions
1) 2) 3) 4) 5) 6) 7)
Read these instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. [. . . ] · cancel closes the panel menu and returns to the highlighted program listing. For recording: · set recording set the program to record (opens the Record Options menu). · delete recording remove the recording from the schedule (requires confirmation). · edit recording edit the recording settings (opens the Record Options menu). For reminder: · set reminder set the program to remind (opens the Remind Options menu). · delete reminder remove the reminder from the schedule (requires confirmation). · edit reminder edit the reminder settings (opens the Remind Options menu).
2 Press
to select one of the setup areas.
As you highlight an option you can see the settings you can adjust in that area: · System Settings ZIP/postal code, cable setup, etc. · Channel Display Channel position, tuning channel, display on/off, etc. · Default Options General, recording and reminder defaults
Changing the System Settings
The System Settings include your ZIP/postal code and your cable TV setup.
1 Highlight the "Change System Settings" item.
55
En
10
TV Guide On ScreenTM System Operation
2 Press ENTER to display the current settings and the
options to change them.
3 Press / to highlight a channel then press ENTER to go
to the Grid Options menu.
3 Select one of the options, then follow the on-screen
instructions. · Yes, everything is correct: displays a helpful information screen. · Yes, but my channel lineup is incorrect: displays a screen from which you may choose the correct channel lineup. · No, repeat setup process: displays screen 1 shown on page 32.
From the Grid Options menu you can set: · channel On (display in channel list), Off (don't display) or Auto Hide (hide when no program information is available) · service the type of service that the channel operates on (cable, etc. ) · tune channel the channel number that the channel listing is tuned to · position place that the channel appears in the channel list
Changing the Channel Display settings
From the Channel Display settings you can set/change: · the display setting to always display (On), never display (Off), or display only when channel information is available (Auto Hide). · the channel position in the channel listing.
4 When you've made all the settings you want for the
channel, highlight "done" then press ENTER. · To cancel without saving any of the changes you made, select "cancel".
1 Highlight the "Change Channel Display" item.
2 Press ENTER to display the channel editor.
56
En
TV Guide On ScreenTM System Operation
Changing the Default Options
This is the place to change the default settings for recordings, reminders and other general settings.
10
1 Select the "Change Default Options" item.
2 Select one of the three default option categories.
A different panel menu appears for each option: General default options · box size the initial size of the Info Box (no, small, large, last used) · box cycle the cycle behavior of the Info Box (no only, small only, large only, no & small, no & large, small & large, all) · auto guide Display TV Guide On ScreenTM guide automatically when you switch on the TV (On, Off)
Record defaults · start when to start a recording (up to 120 minutes earlier or later than the program start time, or On time) · end when to end a recording (up to 120 minutes earlier or later than the program end time, or On time) · recorder selects a recorder to be used for recording. · quality recording quality (for i. LINK connectable devices only) Remind defaults · auto tune automatically tunes to the correct channel when a reminder becomes due (Yes or No) · when when to display the reminder (15 minutes early to 15 minutes late, or On time)
3 When you've made all the settings you want, highlight
"done" then press ENTER. · To cancel without saving any of the changes you made, select "cancel".
57
En
11
Adjustments and Settings Adjustments and Settings
Sleep Timer
You can also use the menu to change the options. When the selected time elapses, the Sleep Timer automatically places the system into the standby mode. · Each time you press SLEEP, the selection is switched as below:
1 2 3 4
Press HOME MENU. ( / then ENTER) then ENTER) then ENTER) Select "AV Selection". ( /
AV Selection STANDARD DYNAMIC
30
(cancel)
60 120
90
(minutes)
Off
MOVIE GAME USER PURE
· The factory default is "Off".
NOTE
· To cancel the Sleep Timer, select "Off" by pressing SLEEP. · Five minutes before the selected time elapses, the remaining time appears every minute. You can also use the menu to set the Sleep Timer.
For AV source
Item
STANDARD
Description
For a highly defined image in a normally bright room This selection is shared by the external input and TV input sources. [. . . ] Here is a sample; alter the names: Yoyodyne, Inc. , hereby disclaims all copyright interest in the library 'Frob' (a library for tweaking knobs) written by James Random Hacker. signature of Ty Coon, 1 April 1990 Ty Coon, President of Vice That's all there is to it!
97
En
14
Appendix
Specifications
Item
Number of Pixels Audio Amplifier Surround System Power Requirement Dimensions Weight
50"Plasma Display, Model: PRO-506PU
1280 × 768 pixels 13 W + 13 W (1 kHz, 10 %, 8 ) SRS/FOCUS/TruBass 120 V AC, 60 Hz, 355 W (0. 2 W Standby) 1224 (W) × 717 (H) × 92 (D) mm (48 3/16 (W) × 28 1/4 (H) × 3 5/8 (D) inches) 31. 8 kg (70. 1 lbs. )
43" Plasma Display, Model: PRO-436PU
1024 × 768 pixels 13 W + 13 W (1 kHz, 10 %, 8 ) SRS/FOCUS/TruBass 120 V AC, 60 Hz, 296 W (0. 2 W Standby) 1076 (W) × 632 (H) × 92 (D) mm (42 3/8 (W) × 24 29/32 (H) × 3 5/8 (D) inches) 25. 8 kg (56. 9 lbs. )
Item
Reception System (Digital) Circuit type Tuner VHF/UHF CATV Audio format Reception System (Analog) Circuit type Tuner VHF/UHF CATV Audio multiplex Terminals Rear ANT/CABLE A IN ANT B IN i. LINK (TS) INPUT 1 INPUT 2 INPUT 3 MONITOR OUT Digital Audio Output G-LINK CONTROL IN CONTROL OUT SUB WOOFER OUTPUT Cable CARD Front INPUT 4 PC On-screen display languages Power Requirement Dimensions Weight
Media Receiver, Model: PRO-R06U
ATSC Digital TV system 8VSB/64QAM/256QAM/QPSK demodulation VHF Ch. 2135 Dolby Digital American TV standard NTSC system Video signal detection PLL full synchronous detection, PLL digital synthesizer system VHF Ch. 1135 BTSC system
75 UNBAL, F Type for DTV/VHF/UHF/CATV in 75 UNBAL, F Type for VHF/UHF/CATV in Loop out S400 (2) COMPONENT VIDEO in, S-VIDEO in, VIDEO in, AUDIO in, HDMI in* S-VIDEO in, VIDEO in, AUDIO in COMPONENT VIDEO in, AUDIO in, HDMI in* VIDEO out, AUDIO out Optical (1) 1 1 1 Variable Point of Deployment COMPONENT VIDEO in, S-VIDEO in, VIDEO in, AUDIO in (Audio input is shared with PC INPUT. ) Analog RGB in, AUDIO in English/French/Spanish 120 V AC, 60 Hz, 37 W (26 W Standby) 420 (W) × 90 (H) × 299 (D) mm (16 9/16 (W) × 3 9/16 (H) × 11 13/16 (D) inches) 4. 5 kg (9. 9 lbs. )
This conforms to HDMI1. 1 and HDCP1. 1. [. . . ]