User manual PHILIPS TD6816

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS TD6816. We hope that this PHILIPS TD6816 user guide will be useful to you.


PHILIPS TD6816 : Download the complete user guide (889 Ko)

You may also download the following manuals related to this product:

   PHILIPS TD6816 (882 ko)
   PHILIPS TD6816 (865 ko)
   PHILIPS TD6816 (870 ko)
   PHILIPS TD6816 (871 ko)
   PHILIPS TD6816 (884 ko)
   PHILIPS TD6816 (873 ko)
   PHILIPS TD6816 (867 ko)
   PHILIPS TD6816 ANNEXE 3 (872 ko)
   PHILIPS TD6816 (887 ko)

Manual abstract: user guide PHILIPS TD6816

Detailed instructions for use are in the User's Guide.

[. . . ] we advise you to place your charger at least 50 cm from any other electronic device. · Place the charger on a flat surface as with the base station or mount it on a wall. · Significant obstacles such as concrete walls or metallic supports (windows and door frames, partitions, etc. ) will lessen the communication range between the base station and the handset. Installing the charger on a horizontal surface 1 Plug the power cable into the charger. 2 3 Plug the power cable into the wall socket. Place the handset in the charger. Installing your extra handset 7 Mounting the charger on a wall 1 Fix the screws (not supplied) according to the diagram below. 3 mm 2 - 2. 5 mm 46 mm 1. 5 - 2 mm 8 mm 2 3 4 5 Plug the power cable into the charger as shown on page 7. [. . . ] You can change this name from your extra handset as follows: 1 2 Press o. Press Press - until BASE NAME is displayed, then press If the base station has a name, this will be displayed. You can enter characters by pressing the key with the required character on it one or more times. These characters are engraved on the handset keypad. If you wish to enter two successive characters which are on the same key, you need to distinguish them by pressing the - key between the two characters. 7 P 4 Press 44 H - 444 I 555 L 444 I 7 P - 7777 S o. Press R to leave menu mode. Installing your extra handset 11 Using your extra handset Making an outside call Direct dialling 1 Press the t key on the handset. The t symbol is shown on the display and you hear the dial tone in the handset earpiece. The number called is displayed for 10 seconds after the last key is pressed. If the number you enter is longer than 10 digits, the display will scroll the number to the left to show the last digits. The duration of your call in minutes and seconds is displayed for 4 seconds. 2 3 Dialling with number preparation This way of dialling allows you to make corrections to the number before dialling. You can use the + key to make corrections by cancelling the last digit entered. If the number you enter is longer than 10 digits, the display will scroll the number to the left to show the last digits. Tip If you want to see the whole number you have dialled so far, press o. The number will scroll to the left if it is longer than 10 digits. 12 Using your extra handset 2 Press the t key on the handset. The call duration is displayed for 4 seconds. 3 Answering an outside call When someone calls you, the base station and the extra handset ring, the t symbol blinks on the extra handset display and the green light on the base station flashes. The green light on the base station blinks regularly to indicate that a call is in progress. The call duration is displayed for 4 seconds. 2 Making an internal call When you have more than one handset, you can make internal calls free of charge between handsets registered with the same base station. You hear the internal dial tone and the t symbol is shown on the display. Dial the number of the handset you want to call, or press * to call all your handsets. To hang up, press t or replace the handset in the charger. 2 3 If you press * to call all handsets, and one of your handsets is in Baby Sit mode, then this handset will take the call. Note: Using your extra handset 13 Answering an internal call When another handset calls you, your handset will ring with the internal call melody, the t symbol will blink on the display and the number of the handset calling you will be displayed. To hang up, press charger. 2 t or replace the handset in the Using the handset loudspeaker Your extra handset is fitted with a loudspeaker as well, so that other people with you can listen to the conversation. [. . . ] The handset(s) called start(s) ringing. 2 Using your extra handset 15 3 Once the other handset answers, you can either: - Transfer the call by pressing t. - Switch back and forth between the other handset and your outside call by using e. In case of replacement, you must use the following approved batteries: PHILIPS R6 NC-P, Saft RC6. The manufacturer is not liable if these recommendations are not respected. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS TD6816




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS TD6816 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.