User manual PHILIPS SWF2620

[. . . ] Turn your computer off and remove the power plug from the plug socket. Insert the PCI card into the free PCI slot and screw it firmly on the bracket side. [. . . ] Turn off the computer, remove SWF2620, and try to restart the computer. If the computer cannot startup successfully, then this SWF2620 is possibly defective. So that it makes connections for both PC peripherals and consumer electronics possible. If no installation CD is available, contact the Microsoft technical support center or website for more information. Connect the sound output of the camera to the "LINE-IN" on your sound card. connect the FireWire cable properly to the camera and the 1394 adapter. Select the camera in your video software and select the necessary settings. An error message appears on the screen), turn off and then turn on the DV device again. You can also disconnect the cable between the PC and the device and reconnect it again!Then turn on your computer and DV camcorder or tape deck after a few seconds after your computer has completed the startup process. [. . . ] If you have two computers which operate Windows XP (such as a PC and a notebook) and both computers have FireWire connection, you can make a direct, fast network connection between these computers via a FireWire cable. Note: You can connect either the IEEE1394 network or the existing LAN network. [. . . ]