User manual PHILIPS SRU 3040

[. . . ] Because the SRU 3040 may use different signals for each brand and even for different models of the same brand, it is advisable to test whether your device responds to the SRU 3040. You can repeat the same steps for other devices (DVD player/ recorder and VCR) which you want to operate using the SRU 3040. [. . . ] Automatically setting the remote control The remote control will now automatically search for the right code for your device. Example of TV: 1 Make sure the TV is switched on and select a channel using the original remote control or the keys on the TV (for example channel 1). 2 Select TV: keep the TV key pressed for 5 seconds until it blinks twice and then remains lit. The SRU 3040 now starts emitting all known `TV off ' signals, one by one. When your TV switches off (stand-by), immediately release the Standby key of the SRU 3040. After the SRU 3040 has run through all the known codes, the search will stop automatically and the TV key stops blinking. The illustration on page 3 gives an overview of all keys and their functions. Switches between normal operation mode and Easy brand scan mode (press with pen or paperclip). - pressed together with SHIFT 6: selects external Audio/Video inputs, connected to the SCART connector(s) of your equipment (A/V function). When pressed at the same time as a second key, the second key will get another function. Try out other combinations with the SHIFT-key on your device in order to find out which functions are available. If the device does not respond at all, or not to all of the key commands, follow the instructions under `Setting the remote control'. [. . . ] When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. please inform yourself about the local separate collection system for electrical and electronic products. [. . . ]