User manual PHILIPS SENSEO HD7820

[. . . ] HD7824, HD7822, HD7820 Coffee Machine 1 A F 2 3 4 5 G B h D E I 6 7 8 9 J K 10 11 12 13 C l 14 15 16 17 M n O P 18 19 20 21 22 23 24 25 26 27 28 29 EnGlIsh Introduction With Douwe Egberts SENSEO\ coffee pods, you can enjoy a perfect cup of coffee at any time of the day. Using more than 250 years of coffee expertise Douwe Egberts has roasted and ground specially selected coffee beans that, when prepared using a special brewing method co-developed with Philips, ensure a full, smooth taste and delicious foam layer. This joint creation, known as the SENSEO\ coffee pod system, consists of the Philips SENSEO\ coffee machine and specially developed Douwe Egberts SENSEO\ coffee pods. Only when used together will you be rewarded with a sensational cup of SENSEO\ coffee with the delicious SENSEO\ foam layer. [. . . ] If there is not enough water left in the water reservoir for brewing two cups of coffee, the light ring around the 2- cup button qq will not go on and this button cannot be operated. - You can interrupt the brewing process at any time by pressing the on/off button 3. If you switch the machine back on after having interrupted the brewing process, the machine will not complete the interrupted brewing cycle. Do not remove the water reservoir during a brewing cycle, as this will cause the machine to draw in air. Types HD7822/HD7820 only: if the cups are only half full when the machine stops brewing, there was not enough water left in the water reservoir to brew two cups. To obtain two full cups, fill the water reservoir and press the 1-cup button q. Note: If you only get a small quantity of coffee or no coffee at all out of the machine, you have not flushed the machine properly before first use. Flush the machine properly (see chapter `Preparing the machine for use') before you brew another cup of coffee. 10 Remove the coffee pod(s) after use by lifting the pod holder out of the machine and emptying it. Be careful when doing this, for there may still be some water/coffee on the coffee pod(s). , , , Tips By rinsing the pod holders, the coffee collector and the coffee spout regularly, you will make sure that the coffee always tastes optimally. If you intend to make another cup of SENSEO\ coffee later, just leave the coffee machine switched on. During the flushing cycle, the machine produces more noise than during a regular brewing cycle. Descaling Regular descaling will prolong the life of the coffee machine and will guarantee optimal brewing results for a long time. If the machine is used twice a day on average, it must be descaled once every 3 months. 1 Fill the water reservoir up to the MAX indication with descaler and water according to the instructions on the package of the descaler. 11) The machine is ready for use when the indicator light burns continuously. 3 Place the 1-cup pod holder q in the coffee machine, preferably with a used coffee pod in it. We advise you to put a used coffee pod in the pod holder when you descale the machine. This pod will serve as a `filter' to prevent the sieve in the pod holder from getting clogged with scale residues. 4 Put a bowl with a capacity of at least 1500 ml under the spout openings to collect the mixture of descaler and water. 7 Empty the water reservoir to remove the mixture of descaler and water. [. . . ] The lid cannot be closed properly. You have not flushed the machine properly before first use. Flush the machine properly (see chapter `Preparing the machine for use') before you brew another cup of coffee. Check if a used coffee pod is sticking to the water distribution disc. Use 1 pod in combination with the 1-cup pod holder q. the water reservoir has been properly placed; there is enough water in the water reservoir (i. e. above the q MIN level if you want to brew 1 cup); the ambient temperature is not lower than 10 °C. [. . . ]