User manual PHILIPS REMOTE CONTROL HOTEL TV RG4172BK

[. . . ] Channels that are not in the Favorite Station memory (see "ADD CHANNEL" on page four) will not be displayed. Each press of the CH GDE button will show subsequent channel listing pages if they exist. If any other remote command is sent that requires the television on-screen display, the listing will be cleared, and that command invoked. [. . . ] Softkey is defined as a command that is never acted upon by the TV control system. Each DCM manufacturer can make its own interpretation of the function of the key. The functional description of the TV controls and features are as follows: To set up the TV, press the TV Setup button to place the remote in TV Setup mode. 4 IB7166E002 MAC 6009 1 To begin programming, press the TV SETUP button on the remote control to put the remote into TV setup mode. Press the SELECT button for the display access functions to appear on the screen. Depending on the model and its features, some or all of the display functions and features described below will be valid. + ADD CHANNEL This function allows individual channels to be added or deleted from memory. Tune the desired channel by using the CHAN-> DELETE xx NEL UP/CHANNEL DOWN buttons or by random access, and then press the + or - button to either add or remove a channel from memory. Once in modification display, a cursor will point to the position on the label. The RESET button will move the cursor to the next position on the label. Press the + button to allow the continuous display of the cur+ REMINDER ON -> REMINDER OFF rent channel number. Press the - button and the channel number will appear for only a few seconds after the channel change. It will then disappear. PICTURE -. . . . . . . . . . . . . . . . . + BRIGHTNESS -. . . . . . . . . . . . . . . . . + COLOR -. . . . . . . . . . . . . . . . . + TINT -. . . . . . . . . . . . . . . . . + SHARPNESS -. . . . . . . . . . . . . . . . . + Press the + or - button to adjust the picture to the desired level. Press the + or - button to adjust the brightness to the desired level. Press the + or - button to set the maximum volume available from the keyboard or the Guest transmitter. LABEL xx + MODIFY - DELETE VOLUME LIMITER -. . . . . . . . . . . . . . . . . + Press the + button to disable the normal functioning of the volume control. This forces the volume to the maximum level allowed by the volume limiter described in the next step. Press the (-) button for "standard volume up/down, " allowing normal volume control operation. Press the VOLUME UP or VOLUME DOWN button to + SET MAX VOL xx set the maximum level available. The range is made up of (VOL FORCED MAX) 63 steps from minimum to maximum. + VOLUME FORCED MAX ->STD VOL UP/DOWN This function will determine what channel the TV will tune to at initial turn on. Press the - button and the TV will, at turn on, tune to the last channel tuned before turn off. [. . . ] You may choose English, Spanish (Español), or French (Français), This function allows the TV to scan all the channels and AUTO PROGRAMMING automatically program in memory all active channels on + TO BEGIN the system. Press the - button at any time to stop this function. LANGUAGE ENGLISH/ESPAÑOL/FRANÇAIS AV MUTE ON/OFF EXIT NO/YES + CH GDE ENABLE Press the + button to enable the Channel Guide feature. _> CH GDE DISABLE Press the - button to disable the function. Press the + or - button to turn AV MUTE On or Off. [. . . ]