User manual PHILIPS MCD288

[. . . ] DVD Micro Theatre MCD288 Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 2 3 Remove fuse cover and fuse. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. [. . . ] (See "Setting up the TV". ) Press STANDBY-ON 2 (STANDBY 2 on the remote). If a disc menu appears on the TV, see "Using the Disc Menu". If the disc is locked by parental control, you must enter your four-digit password. (See "SYSTEM SETUP-PASSWORD". ) At any time, simply press 9 to stop playback. 1 2 During playback, press 2;. Selecting a track/chapter/title (DVD/ VCD/CD/MP3/WMA) 1 2 Press PRESETí/ë during playback to go to the previous or next chapter/title/track. To go directly to any chapter/ title/track, enter the chapter/ title/track number using the Numeric Keypad (0-9). Resuming playback from the last stopped point (DVD/VCD/CD/MP3 /WMA) 4 5 In stop mode and when a disc has not been removed, press 2;. To cancel resume mode In stop mode, press 9 again. 6 25 English Disc Operations English Zoom (DVD/VCD/JPEG) Zooming allows you to enlarge or reduce the video image during playback. Differnt play modes: SHUFFLE and REPEAT (DVD/VCD/CD/MP3/WMA) Press MODE repeatedly to choose a repeat mode during playback. REPEAT ALL SHUFFLE ­ to play the whole disc repeatedly in random order. Repeat A-B (DVD/VCD/CD/MP3/WMA) Slow Motion (DVD/VCD) 1 1 2 Press 4 on the remote during playback to select the required forward speed: 1/2, 1/3, 1/4, 1/5, 1/6 or 1/7. Program (not for Picture CD) To select favourite tracks/chapters for playback in preferred sequence. 2 1 2 3 4 Press PROGRAM to enter the program mode. Use the Numerical Keypad (0-9) to directly input the tracks or chapters. Press OK to start playback. 1 2 Press A-B at your chosen starting point. "A-B CANCEL" is displayed on the TV screen. 3 26 Disc Operations Forward/Reverse Searching (DVD/VCD/ CD) Special disc features Playing a Title (DVD) 1 Press TUNING 22/33 (2/3 on the remote) during playback to select the required speed: X2, X4, X8 or X20 (backward or forward). Time search & search by chapter/track number (DVD/VCD/CD/MP3/WMA) 1 2 3 Press DISC MENU. Camera Angle (DVD) 2 Press ANGLE repeatedly to select different desired angle. Changing the Audio Language (for DVD recorded with multiple languages) Press AUDIO repeatedly to select different audio languages. Changing the Audio Channel (for VCD only) Press AUDIO to select the available audio channels provided by the disc (Mono Left, Mono Right or Stereo). Subtitles (DVD) Press SUBTITLE repeatedly to select different subtitle languages. 1 2 Press GOTO/STEREO until the time or chapter/track edit box appears. Enter hours, minutes and seconds from left to right in the time edit box using the Numeric Keypad (0-9) on the remote. OR Enter your desired chapter/track number in the chapter/track edit box using the Numeric Keypad (0-9) on the remote. [. . . ] Digital sound is available when you use the DIGITAL AUDIO OUT COAXIAL or OPTICAL jacks. These jacks send audio through multiple channels, instead of just two channels as analog does. Dolby Digital: A surround sound system developed by Dolby Laboratories containing up to six channels of digital audio (front left and right, surround left and right and center). JPEG: A still-picture data compression system proposed by the Joint Photographic Expert Group, which features small decrease in image quality in spite of its high compression ratio. [. . . ]