User manual PHILIPS LTC0350

[. . . ] Switchable back-light compensation; improves the image quality for backlighting subjects. Userfriendly back-focus adjustment; rotating the complete lens is no longer required. · · · Printed on recycled paper © Copyright reserved Subject to modification 3122 165 21721 Warnings Warning: To prevent fire or shock hazard, do not expose camera or monitor to rain or moisture. The lightning flash with arrowhead symbol, within a triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure; that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · · · · Reorient or relocate the receiving antenna. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any unauthorized modification to this equipment could result in the revocation of the authorization to operate the equipment. Lenses The camera is provided with a standard CS-mount. Therefore, a wide range of lenses can be used. For example: · fixed iris lenses · manual iris lenses · DC auto-iris lenses · active auto-iris lenses Notes 1. For outdoor applications, a DC or active autoiris lens is recommended. Try to avoid bright light sources in the camera's field of view when you use a fixed iris lens. When you use a DC or active auto-iris lens, the smear will be reduced. When you use a DC or active iris lens, it is recommended to set the Auto Electronic Shutter (AES switch; 8) to the `OFF` position. When an C/CS-mount adapter (optional) is used, C-mount lenses can also be applied. Installation (Figure 1, 2 & 3) Use this screw hole to mount the camera. The screw block can be mounted on the top or bottom side of the camera. Note: Take care to use the original screws (M2 x 6), when mounting the screwblock on the top side. [. . . ] Lock the back-focus mechanism, using screw . Technical specifications Low voltage Mains voltage Medium resolution High resolution Medium resolution High resolution LTC LTC LTC LTC LTC LTC LTC LTC 0330/11 0330/21 0350/11 0350/21 0330/51 0330/61 0350/51 0350/61 PAL NTSC PAL NTSC PAL NTSC PAL NTSC 1/3" IT CCD 512x582 512x492 752x582 768x492 512x582 512x492 752x582 768x492 CS-mount (C-mount using optional adapter ring) 560 380 < 0. 1 lux > 48dB Selectable on/off Electronic/Active video iris/DC iris with level adjustment 1 Vpp ­­ 12-28 V~(AC); 12-36V ¯ (DC) + 10%, -10% 100-240 V~(AC) + 10% - 15% polarity independent, with mechanical ground lead without ground < 2. 0W Internal or line lock when AC-powered (V-phase adjustable) 48 x 49 x 119 mm DC iris level (low-high), V-phase adjustment for line lock -20 to 50°C 451 g (excl. lens) Top and bottom, 1/4" -20 UNC Electronic iris on/off - DC/video, Back light compensation on/off Type TV standard Imaging device Active pixels (HxV) Lens mount Hor. illumination S/N Back light compensation Iris control Video output (75) Power supply Power consumption Synchronization Dimensions (WxHxD) Controls Operating temperature Weight Tripod mount Switches 380 560 All data subject to change without notice. Fig. [. . . ]