User manual PHILIPS HF3463

[. . . ] To fully benefit from the support that Philips offers, register your product at www. The light intensity of the lamp gradually increases to the set level in the 30 minutes before the set wake-up time. The light increases the production of energy hormones and prepares your body for waking up in a very natural way. To make waking up an even more pleasant experience, you can use natural wake-up sounds or the FM radio. [. . . ] When you set the alarm, you choose the light intensity level, the type of sound and the sound level. The light intensity slowly increases to the chosen level during the last 30 minutes before the set alarm time. The sound slowly increases in 90 seconds to the chosen level after the set alarm time. 9) , The alarm time starts flashing and two arrows appear above and below the alarm time (Fig. Press the button longer to put the time forward or backward more quickly. , The first sound symbol (radio) flashes for 3 seconds and the sound can be heard. Note: If you do not confirm the alarm time, the flashing stops after 10 seconds. Press the ALARM button again if you want to select another wake-up sound. When you have found the sound you want to use, do not press the ALARM button again (Fig. , After 3 seconds, the symbol of the sound selected stops flashing to indicate that it has been selected. , The alarm has been set and continues to work until you switch off the alarm function. When you do this, the sound symbol disappears from the display and the light ring round the ALARM button goes out. Setting the light intensity level 1 Use the light adjustment wheel @ to set the light intensity level. Tip:When you use the appliance for the first time, set the light intensity to 20. The moment you wake up, check which light intensity level the appliance has reached by slightly turning the light adjustment wheel @. When you do this, the current alarm light intensity level appears on the display. If you do not want the light to go on at wake-up time, select light intensity level 0. During the first 50 seconds of the test, you see a rapid increase of the light intensity to the selected level. During the last 40 seconds, you hear the selected sound gradually increase to the selected level. Note:The appliance continues to run the accelerated wake-up alarm test until you press the QUICK CHECK button again. At the set time, the wake-up sound is played and the lamp has reached the selected light intensity level. The alarm function is still active and the wake-up alarm will go off at the set time and with the set sound and light intensity the next day (Fig. [. . . ] Perhaps the appliance overheated and the overheating protection switched off the appliance. This is normal, as the appliance is heated up by the light of the lamp. Press the Reset button in the bottom of the appliance or remove the plug from the wall socket and reinsert it. Solution Perhaps you switched off the alarm function by pressing the ALARM button. [. . . ]