User manual PHILIPS FWM372

[. . . ] MP3-CD Mini Hi-Fi System FWM372 FWM572 User manual Manuel d'utilisation Manual del usuario Benutzerhandücher Gebruikershandleidingen Manuale per l'utente Användarhandböckerna Brugermanual Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: Italia DICHIARAZIONE DI CONFORMITA' Si dichiara che l'apparecchio MCD510 Philips risponde alle prescrizioni dell'art. Fatto a Eindhoven Philips Consumer Electronics Philips, Glaslaan 2 5616 JB Eindhoven, The Netherlands 1 2 3 Remove fuse cover and fuse. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. [. . . ] Notes: ­ It is not possible to create a programme with MP3 tracks from multiple CDs, or combined with normal audio tracks. ­ If the total playing time is more than "99:59" then "--:--" is displayed instead of the total playing time. ­ If you attempt to programme more than 99 tracks, "PROGRAM FULL" is displayed. ­ During programming, if no button is pressed within 20 seconds, the system will exit the programme mode automatically. 1 Press REPEAT on the remote control to select: "REPEAT TRACK" ­ to repeat playback of the current track. "REPEAT DISC" ­ to repeat playback of the current disc. "REPEAT OFF" ­ to stop repeat function and playback current disc. 7 To resume normal playback, press REPEAT until "REPEAT OFF" is displayed. 2 Press SHUFFLE on the remote control to select: "SHUFFLE ON" ­ to random playback of the current disc. "SHUFFLE OFF" ­ to stop shuffle function and playback current disc. To resume normal playback, press SHUFFLE until "SHUFFLE OFF" is displayed. Note: ­ During program play mode or playing a MP3 CD, it is not possible to repeat playback of the current disc (Repeat Disc mode). To review the programme Stop playback and press TITLE-/+í/ë repeatedly. To exit review mode, press STOP9. Programming the disc tracks Programming tracks is possible when playback is stopped. Up to 99 tracks can be stored in the memory in any order. Erasing the programme Press STOP9 once when playback is stopped or twice during playback. Note: ­ The programme will be erased when the system is disconnected from the power supply or when the disc tray is opened. For Recording, please refer to "Tape Operation/Recording". 1 2 3 4 Load the desired discs on the disc tray (refer to "Loading discs"). Press TITLE-/+í/ë repeatedly to select the desired track. For MP3 disc, press ALBUM-/+ à á and TITLE-/+í/ë to select the desired album and title for programming. 17 English Radio Reception English Tuning to radio stations 1 Press TUNER to select TUNER mode. A few seconds later, the current radio frequency will appear on the display. Press and hold ALBUM-/+ à á until the frequency indication starts to change, then release. The display will show "SEARCH" until a radio station with sufficient signal strength is found. Repeat step 3 if necessary until you find the desired radio station. 1 Press TUNER to select TUNER mode. 2 3 To begin automatic preset from a desired preset number Press TITLE-/+í/ë PRESET to select the desired preset number. If a radio station has been stored in one of the presets, it will not be stored again under another preset number. 2 4 To tune to a weak station, press ALBUM-/+ à á briefly and repeatedly until optimal reception found. Storing preset radio stations You can store up to 40 preset radio stations in the memory. Automatic Preset Programming Plug and Play setting (refer to "Basic Functions Plug and Play"). The system will automatically store the radio stations with sufficient signal strength, starting from all RDS stations and followed by FM and MW bands respectively. When all the available radio stations are stored or the memory for 40 presets are used, the last preset radio station (or the first available RDS station) will be played. To stop storing the automatic preset Press PROGRAM or STOP9 on the system. Note: ­ If no preset number is selected, automatic preset will begin from preset (1) and all your former presets will be overridden. 18 Radio Reception Manual Preset Programming RDS RDS (Radio Data System) is a broadcasting service that allows FM stations to send additional information along with the regular FM radio signal. [. . . ] Do not use a solution containing alcohol, spirits, ammonia or abrasives. Cleaning Discs When a disc becomes dirty, clean it with a cleaning cloth. Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records. Cleaning the disc lens After prolonged use, dirt or dust may accumulate at the disc lens. [. . . ]