User manual PHILIPS FW750C/22S

[. . . ] How to connect a plug The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L). ¶ As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows: ­ Connect the blue wire to the terminal marked N or coloured black. ­ Do not connect either wire to the earth terminal in the plug, marked E (or e) or coloured green (or green and yellow). Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires. [. . . ] If you do not complete the Plug and Play installation, the function will be restarted when you next turn on the main supply again. Notes: ­ When the power is turned on, the disc tray may open and close to initialise the system. If no stereo frequency is detected during Plug and Play , "CHECK ANTENNA" will be displayed. ­ During Plug and Play, if no button is pressed within 15 seconds, the system will exit Plug and Play mode. Note: ­ If you have not deactivated the demonstration, it will resume five seconds after the system switches to Eco Power standby or standby mode. To listen through the headphones G Connect the headphones plug to the n socket at the front of the system. DSC (Digital Sound Control) The DSC feature enables you to enjoy special sound effects that have preset equaliser settings, providing the best music reproduction. For optimal sound listening, select only one of the following navigation sound controls at a time : MAX SOUND, DSC or VEC. MAX Sound MAX sound provides the best mixture of various sound features (DSC, VEC, DBB, for example). Note: ­ When MAX sound is selected, all other sound navigation will switch off automatically. Incredible Surround The Incredible Surround magnifies the virtual distance between the front speakers for an incredibly wide, enveloping, stereo effect. ­ If the total playing time is more than "99:59" then "--:--" is displayed instead of the total playing time. ­ If you attempt to programme more than 99 tracks, "FULL" is displayed. ­ During programming, if no button is pressed within 20 seconds, the system will exit the programme mode automatically. You can select and change the various play modes before or during playback. Notes: ­ During programme play mode, it is not possible to repeat playback the current disc (Repeat Disc mode). G Press Ç once when playback is stopped or twice during playback. Note: ­ The programme will be erased when the system is disconnected from the power supply or when the disc tray is opened. Press and hold à or á until the frequency indication starts to change, then release. The display will show "SEARCH" until a radio station with sufficient signal strength is found. To begin automatic preset from a desired preset number G Press í or ë to select the desired preset number. If a radio station has been stored in one of the presets, it will not be stored again under another preset number. [. . . ] It will scan the radio stations stored in the first 5 preset and wait for the News Programme Type data to be available in any of these RDS radio stations. While searching NEWS in progress, the current source activity will remain uninterrupted. ­ Before playing a tape, check and tighten slack tape with a pencil. ­ Store the tapes at room temperature and do not put them too close to a magnetic field (for example, a transformer, TV or speaker). [. . . ]