User manual PHILIPS FW630

[. . . ] · So complete and return the Warranty Registration Card enclosed with your purchase at once, and take advantage of these important benefits. Warranty Verification Registering your product within 10 days confirms your right to maximum protection under the terms and conditions of your Philips warranty. Owner Confirmation Your completed Warranty Registration Card serves as verification of ownership in the event of product theft or loss. Model Registration Returning your Warranty Registration Card right away guarantees you'll receive all the information and special offers which you qualify for as the owner of your model. IS TR ATION N EE !rry Hu IT S REG Know these safety symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN DED W Congratulations on your purchase, and welcome to the "family!" Dear Philips product owner: Thank you for your confidence in Philips. You've selected one of the best-built, best-backed products available today. And we'll do everything in our power to keep you happy with your purchase for many years to come. As a member of the Philips "family, " you're entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry. [. . . ] The selected disc tray, total number of tracks and the playing time will appear on the display. ­ To ensure good system performance, wait until the disc tray completely reads the disc(s) before proceeding. 1 17 12/11/01, 5:25 PM 3139 pg 001-030/C555/37-Eng 17 115 21151 English VAC 2 T EX S CD Operation Disc Playback To playback all discs on the disc tray G Press PLAYÉ . During playback, the selected disc tray, track number and elapsed playing time of the current track will appear on the display. To playback one disc only G Press the DISC DIRECT PLAY button : DISC 1, DISC 2 or DISC 3. To search for a particular passage during playback G Press and hold à or á and release it when the desired passage is located. To select a desired track G Press í or ë repeatedly until the desired track appears on the display. Note: ­ In Shuffle mode, pressingí will cause the player to skip only to the beginning of the current track. To skip to the beginning of the current track during playback G Press í once. 1 2 To replace discs during playback Press DISC CHANGE. "DISC CHANGE" will be displayed and the disc will stop playing. The disc tray will close to retrieve the inner disc, then reopen with the inner disc accessible. English Programming the disc tracks Programming tracks is possible when playback is stopped. Load the desired discs on the disc tray (refer to "Loading Discs"). All available radio stations with sufficient signal strength will be stored automatically. The system will stop searching when all the available radio stations are stored or when the memory for 40 preset radio stations is used. The last preset radio station will then be played when completed. pg 001-030/C555/37-Eng S TAPE TAPE 1·2 AUX CDR / DVD · MAX BASS PORT DB B To stop storing the automatic preset G Press PROG or Ç on the system. Note: ­ If no preset number is selected, automatic preset will begin from preset (1) and all your former presets will be overridden. Manual Preset Programming Press TUNER (FM·AM) repeatedly to select the desired waveband : FM or AM. 3 Press and hold à or á until the frequency indication starts to change, then release. The display will show "SEARCH" until a radio station with sufficient signal strength is found. To store the radio station to another preset number G Press í or ë to select the desired preset number. Tuning to a weak radio station G Press à or á briefly and repeatedly until the optimal reception is found. To stop storing the manual preset G Press Ç on the system. 1 20 115 21151 Radio Reception Notes: ­ If you attempt to store more than 40 preset radio stations, "PROGRAM FULL" will be displayed. ­ During programming, if no button is pressed within 20 seconds, the system will exit the Program mode automatically. 1 Tuning to Preset Radio Stations G Once you've preset the radio stations, press í or ë to select the desired preset number. [. . . ] ­ Insert the batteries with their polarities (+/­ signs) aligned as indicated. ­ Point the remote control in the direction of the system's IR sensor. ­ Power has been interrupted or the power cord has been disconnected. ­ Press and hold DEMO STOP Çon the system to switch off the demonstration. The timer is not working. Not all lighted buttons are showing light. [. . . ]