User manual PHILIPS FW535C

[. . . ] How to connect a plug The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L). ¶ As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows: ­ Connect the blue wire to the terminal marked N or coloured black. ­ Do not connect either wire to the earth terminal in the plug, marked E (or e) or coloured green (or green and yellow). Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires. [. . . ] If RDS station does not transmit RDS time within 90 seconds, the programme will exit automatically and the display will show "NO RDS TIME". Notes: ­ When the power is turned on, the disc tray may open and close to initialise the system. ­ If you do not complete Plug and Play installation, Plug and Play will be reinitiated the next time you turn on the power. If no stereo frequency is detected during Plug and Play , "CHECK ANTENNA" will be displayed. ­ During Plug and Play, if no button is pressed within 15 seconds, the system will exit Plug and Play mode automatically. Note: ­ Even if you remove the AC power cord and reconnect it to the wall socket, the demonstration will remain off until you activate it again. Note: ­ If you have not deactivated the demonstration, it will resume five seconds after the system switches to Eco Power Standby or Standby mode. As a power-saving feature, the system will automatically switch to Standby mode if you do not press any buttons within 30 minutes after a disc or tape has stopped playing. For optimal sound listening, select only one of the following navigation sound controls at a time : wOOx, DSC or VAC. Note: ­ Some discs or tapes might be recorded in high modulation, which causes a distortion at high volume. You can manually select the wOOx setting that best suits your listening environment. All the available discs and their tracks or all the programmed tracks can be played in random order. G The discs and the tracks will be played in random order until you press Ç. When select REPEAT mode during shuffling G In normal shuffled playback "TRACK" and "ALL DISC" repeat modes are available for selection. G In programme shuffled playback "TRACK" or "PROGRAM" repeat modes are available for selection. The current track, a disc, all available discs or all programmed tracks can be played repeatedly. G The selected track/disc(s)/programme will now be played repeatedly until you press Ç. Note: ­ Selecting SHUFFLE during repeat playback will cancel all repeat modes. To begin automatic preset from a desired preset number G Press í or ë to select the desired preset number. For those radio stations that had been stored in one of the preset will not be restored again to another preset number. The system will search for all RDS stations and then continue with radio stations on FM, MW and LW band respectively. All available radio stations with sufficient signal strength will be stored automatically. [. . . ] Connect the audio out terminals of the external equipment (TV, VCR, Laser Disc player, DVD player or CD Recorder) to the AUX/CDR IN terminals of your system. When in Eco Power Standby mode, it is not possible to operate clock or timer function. Notes: ­ The clock setting will be cancelled when the power cord is disconnected or if a power failure occurs. ­ During clock setting, if no button is pressed within 90 seconds, the system will exit clock setting mode automatically. [. . . ]