User manual PHILIPS FW-C717

[. . . ] Mini Hi-Fi System FW-C717 1 Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: Italia DICHIARAZIONE DI CONFORMITA' Si dichiara che l'apparecchio FW-C717 Philips risponde alle prescrizioni dell'art. Fatto a Eindhoven Philips Consumer Electronics Philips, Glaslaan 2 5616 JB Eindhoven, The Netherlands 1 2 3 Remove fuse cover and fuse. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. [. . . ] Notes: ­ If the total playing time is more than "99:59" or if one of the programmed tracks has a number greater than 30, then "--:--" will appear on the display instead of the total playing time. ­ If you attempt to programme more than 40 tracks, "PROGRAM FULL" will be displayed. ­ If you press any of the DISC DIRECT PLAY buttons, the system will playback the selected disc or track, and the stored programme will be ignored temporarily. The PROG symbol also will disappear temporarily from the display. ­ During programming, if no button is pressed within 20 seconds, the system will exit the Programme mode automatically. To review the programme G Stop playback and press í or ë repeatedly. G To exit review mode, press Ç. 17 English CD Operation English To erase the entire programme G Press Ç once when playback is stopped or twice during playback. Note: ­ The programme will be erased when the system is disconnected from the power supply or when the disc tray is opened. Shuffle All the available discs and their tracks or all the programmed tracks can be played in random order. G The discs and the tracks will be played in random order until you press Ç. When select REPEAT mode during shuffling G In normal shuffled playback "TRACK" and "ALL DISC" repeat modes are available for selection. G In programme shuffled playback "TRACK" or "PROGRAM" repeat modes are available for selection. RPT , SHUFF and PROG will appear on the display. 1 Repeat The current track, a disc, all available discs or all programmed tracks can be played repeatedly. Press REPEAT on the remote control repeatedly to select various repeat modes. G In normal playback "TRACK" ­ to repeat the current track. G In programme playback "TRACK" ­ to repeat the current programmed track. G The selected track/disc(s)/programme will now be played repeatedly until you press Ç. 2 To resume normal playback, press REPEAT until the "OFF" mode is displayed. Note: ­ Selecting SHUFFLE during repeat playback will cancel all repeat modes. 1 For Recording, please refer to "Tape Operation/Recording". 18 Radio Reception English Storing Preset Radio Stations You can store up to 40 preset radio stations in the memory. Automatic Preset Programming G Plug and Play setting (refer to "Basic Functions Plug and Play"). A few seconds later, the current radio frequency will appear on the display. To begin automatic preset from a desired preset number G Press í or ë to select the desired preset number. For those radio stations that had been stored in one of the preset will not be restored again to another preset number. The system will search for all RDS stations and then continue with radio stations on FM, MW and LW band respectively. [. . . ] 60 ­ 15000 Hz (5 dB) Signal-to-noise ratio Normal tape (type I) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 4% DIN Specifications and external appearance are subject to change without notice. 27 English Maintenance English Cleaning the Cabinet ¶ Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Cleaning Discs ¶ When a disc becomes dirty, clean it with a cleaning cloth. [. . . ]