User manual PHILIPS BT9290/32

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS BT9290/32. We hope that this PHILIPS BT9290/32 user guide will be useful to you.


PHILIPS BT9290/32 : Download the complete user guide (10766 Ko)

Manual abstract: user guide PHILIPS BT9290/32

Detailed instructions for use are in the User's Guide.

[. . . ] -- Make sure the appliance is switched off and disconnected from the mains before you clean it under the tap. -- If the appliance is subjected to a major change in temperature, pressure or humidity, let the appliance acclimatise for 30 minutes before you use it. English 7 -- If the adapter is damaged, always have it replaced with one of the original type in order to avoid a hazard. -- Never use compressed air, scouring pads, abrasivecleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. [. . . ] 4 When you are finished, press the on/off button to switch off the appliance. Tip:When the motor of the appliance is not operating, the laser guide switches off automatically within 3 minutes. In the 3 minutes before the automatic switch-off of the laser guide, you can use the laser guide to check if the contours of your beard are symmetrical or straight. 5 Push down the top of the laser guide to lock it in ‘off’ position (‘click’). Trimming without comb If you trim without comb, your hair is cut off close to the skin. 6in) side of the trimming head allows more precise styling and contouring than the 32mm (1. 2 Turn the trimming head until the side you want to use points to the front of the appliance. 4 Hold the appliance in the position that is most convenient for the area you want to trim and make strokes in the desired direction. Tip: For a comfortable trim close to your skin, place the flat side of the trimming head against your skin and make strokes in the desired direction. 5 When you are finished, press the on/off button to switch off the appliance. Trimming with comb The appliance comes with two combs: a standard comb and a precision comb. These combs keep the trimming head at a certain distance from your skin. This distance determines the remaining hair length and can be adjusted by turning the zoom wheel. 11 -- Use the precision comb to trim hard-to-reach areas, for instance under your nose. 1 Slide the comb into the guiding grooves on both sides of the appliance (‘click’). If this is the case, turn the trimming head before you slide the comb onto the trimming head. -- The length setting selected lights up on the front of the appliance. 4mm to 7mm (see table in section ‘Length settings’ below). 12 English 3 Press the on/off button to switch on the appliance. 4 To trim your beard,  move the trimming comb through the hair slowly. 5 When you are finished, press the on/off button to switch off the appliance. Tips -- Always make sure that the tips of the trimming comb point in the direction in which you move the appliance. [. . . ] To trim with one of the combs, you first have to push the laser guide to ‘off ’ position. The standard comb is most suitable for trimming your beard to an even length. The precision comb is especially suitable for trimming hard-to-reach areas, for instance beneath your nose. -- Hvis adapteren er skadet, må du alltid sørge for å bytte den ut med en av original type for å unngå at det oppstår farlige situasjoner. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS BT9290/32




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS BT9290/32 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.