User manual PHILIPS 50FD9934/01S

[. . . ] This symbol informs that there are contents that demand caution (including warnings). This symbol indicates something that must be done. WARNING Ignoring this indication and improper handling could be the cause of personal injury such as a serious injury or death. When installing the plasma display or making angle adjustments, be sure to make a request for service with the dealer and ensure the work is performed according to this manual. Incorrect installation and angle adjustments may result in the plasma display falling and causing injury. To prevent the plasma display from falling, the strength of the installation place and the method of fastening must support the combined weight of the plasma display and the mounting unit for an extended period of time as well as withstand earthquakes. [. . . ] When activated a green indicator starts blinking in front of the plasma display. q Picture format Press the q key to switch between the different picture formats. Picture format Press the q key to switch between the different picture formats. 10, is off, the picture format of RGB-input pictures will be TRUE in place of NORMAL. VGA-mode 4:3 signals Wide signals Normal/True True Full Full 6 Use of the remote control Use of the menus and the menu system & Press the MENU key on the remote control to display/cancel the MAIN MENU. é Use the cursor key in the up/down directions to select the menus. ` Use the cursor key in the up/down directions to select the menu items. Select OFF, NR-1, NR-2 or NR-3 according to the level of noise present. 8, to restore the predefined factory PICTURE settings. Use of the menus and the menu system 7 Screen settings menu SCREEN MODE V-POSITION H-POSITION AUTO PICTURE FINE PICTURE PICTURE ADJ. NORMAL In this menu you are allowed to adjust the position of the picture and to correct the flickering of the picture menu items. are available only when you select AUTO PICTURE OFF. J SELECT L M ADJUST MENU RETURN - Select RESET in the OPTIONS 1 menu to restore the predefined factory PICTURE settings. & Select MODE and press the cursor left/right to select a picture format (NORMAL or FULL in VGA-mode). é Select AUTO PICTURE ON or OFF. When having selected ON, the PICTURE ADJ. adjusts for striped patterns on the picture. V-POSITION adjusts the vertical position, H-POSITION adjusts the horizontal position, " Select V-POSITION, H-POSITION to adjust the position of the picture. Options 1 menu OSD Select OFF if you do not want On screen information like input source, screen mode, etc. The power management function is an energy-saving function and automatically reduces the monitor's power consumption if the computer's keyboard or mouse in not operated for a certain time. Note: if the computer's power is not turned on, the power management function is set to OFF. GRAY LEVEL This control allows you to set the gray level for the sides of the screen when a normal 4:3 picture mode is displayed. It adjusts the brightness of the black for the sides of the screen. The standard is 0 (black) and the level can be adjusted from 0 to 15. The predefined factory setting is 3 (dark gray). CINEMA MODE Select CINEMA MODE ON to automatically discriminate and project the film image in a cinema mode suited to the picture (NTSC, PAL60, 480I, (60Hz) only). OSD ADJ. 1 4 7 2 5 8 3 6 9 8 Use of the menus and the menu system LONG LIFE (PLE INVERSE SCREEN WIPER PRESS OK TO SET TIMER FUNCTIONS AUTO) DVI ADJ This control allows you to select the most appropriate setting when the picture input from the DVI input extension is distorted. Note: When you adjust the DVI ADJ. , the position of the menu display will change. LONG LIFE This control allows you to select a setting to prevent or to reduce burn-in of the screen. J SELECT L M ADJUST MENU RETURN INVERSE/WT WORKING TIME WAITING TIME · · · 1h 30m h m & Select LONG LIFE. " Select PLE AUTO or LOCK (only with VGA and DVI inputs). AUTO automatically adjusts the brightness of the screen to suit the picture quality. LOCK sets the brightness level to minimum. ` Select INVERSE ON, OFF or WT. ON : the picture is displayed alternately between positive and negative image. When having selected on, press the OK key to enter the INVERSE/WT menu J SELECT L M ADJUST MENU RETURN SCREEN WIPER WORKING TIME WAITING TIME · · · · SPEED · 1h 30m h m and to set the timer functions. Select WORKING TIME and enter the hours (h) and minutes (m) with the cursor keys to select the time the inverse mode has to be active. Select WAITING TIME and enter the hours (h) and minutes (m) with the cursor keys to select the time after which the inverse mode should become active. ( Select SCREEN WIPER ON or OFF. Select ON and press the OK key: a white vertical bar is moving from left to right over the screen to prevent burn-in. Set the timer functions (see the inverse mode) and the speed (from 1, fast, to 5, slow) with the cursor keys in the SCREEN WIPER menu. [. . . ] Do not use abrasives solvents as it can damage the glass surface of the screen. Plasma Display characteristics Caution: A video source (such as a video game, DVD, or video information channel) which shows a constant non-moving pattern on the monitor, can cause damage to the screen. When your Flat-Monitor is continuously used with such a source, the pattern of the non-moving portion of the game (DVD, etc. ) could leave an image permanently on the screen. When not in use, turn the video source OFF. To prevent or to reduce burn-in of the screen, select a LONG LIFE setting in the OPTIONS1 menu. This is quite normal for plasma displays and these effects will disappear after the set has been turned on for some time. [. . . ]