User manual PHILIPS 42FD9932/01S

[. . . ] packaging) is about 43 kg. Connect your computer & é Connect one end of the VGA cable 1 supplied to the video card of the computer and the other end to the VGA IN connector at the rear side of the monitor. In case of a Multimedia computer, connect the audio cable 2 to the audio outputs of your Multimedia computer and to the AUDIO IN R (right) and L (left) inputs of the monitor. [. . . ] Make sure that your PC is switched on and is in the correct display mode. é " B 2 Use of the remote control B VGA no function FRONT no function AV1, AV2, AV3, AV4 no function FRONT o VGA OK no function B OK to activate your choice MENU AV1 p MENU to switch the menu on/off cursor keys to select your choice and to alter a selected adjustment p Picture format In VGA mode, press the p or keys to switch between a 4:3 or a 16:9 picture format. In VGA display mode 800x450 Wide VGA is fixed. AV2 oe AV3 ¬ AV4 SMART PICTURE SOUND CONTROLS - CH/P + no function - CH/P + -V+ V press - or + to adjust the volume ¬ Mute key temporarily mute the sound or restore it SMART CONTROLS PICTURE/SOUND no function Menu & é Press the MENU key to switch the menu on. Select one of the PC symbols with the o and oe keys: H for contrast G for brightness, C for colour (not in VGA mode) for tint (if a NTSC peripheral is connected. Not in VGA mode) for colour temperature for horizontal picture position for vertical picture position V for volume l m " ` for treble (not in VGA mode) for bass (not in VGA mode) Press the p and keys to alter the selected adjustment. Press the MENU key again to switch the menu off. 3 Tips Ambient temperature Do not hang up the monitor above a central heating or other heating sources. Active Loop Through The Active Loop Through facility makes it possible to make a daisy chain for VGA. Care of the screen Clean the anti-reflex coated flat glass screen with a slightly damp soft cloth. Do not use abrasives solvents as it can damage the glass surface of the screen. Plasma Display characteristics When switching over to another picture after having displayed the same still picture for a long time (many hours), it may happen that some parts from the previous picture will remain on screen due to a kind of memory effect. This ghost picture will disappear after some time. To avoid this effect change the pictures regularly or for PC use you can turn on a screen saver in your computer. Philips has built in an automatic shift of the picture every 5 minutes to avoid this effect and to prolong the life of the screen. This is quite normal for plasma displays and these effects will disappear after the set has been turned on for some time. It is within industry standards that very few pixels (< 0. 001%) may be defective, even for a new set. [. . . ] Please ensure you dispose of your old monitor according to local regulations. How to dispose of batteries ?The batteries supplied do not contain the heavy metals mercury and cadmium. [. . . ]