User manual PHILIPS 25PT5324/58R

[. . . ] Note: when the LOCK function is activated, these keys are unavailable (refer to FEATURES menu on page 7). 2 The remote control keys Screen information T display / remove the programme o number, the name (if it exists), the time, the sound mode and the time remaining on the timer. Hold down for 5 seconds to permanently display the programme number on the screen. Sleeptimer To select the length of time before the set automatically switches to standby (from 0 to 120 minutes). Select EXT sockets Press several times to select EXT1, S-VHS2, EXT2 and on certain models EXT3 and S-VHS3. [. . . ] To exit: press the key. æ Select MANUAL STORE ( ) and press Naming programmes If you wish, you can name the first 30 programmes (0 to 29). · Use the keys to move around in the area which displays the name (5 characters). ® Press and repeat the operation for each programme you wish to name. To exit: Press the key. 6 Using other menus To display a menu Press . Select the PICTURE, SOUND or FEATURES. Press . The menu appears. Use the keys to select an adjustment and The key is used to exit from the menu displayed. to make that adjustment. Picture menu You can adjust BRIGHTNESS, COLOUR, CONTRAST, SHARPNESS and COLOUR TEMP · SHARPNESS: modifies the clarity of the picture, · COLOUR TEMP (colour temperature): adjusts the colour temperature of the picture. Three options are available here: COOL (blue white), NORMAL (balanced) or WARM (red white). Sound menu You can adjust TREBLE, BASS, BALANCE, AVL and HEADPHONE. · AVL (automatic volume leveller): used for automatic level control in order to avoid sudden increases in volume (particularly when changing channels or during advertisements). · HEADPHONES: this menu is used to access the separate headphone VOLUME control, the BALANCE and the SOUND MODE (you can choose between DUAL I and DUAL II for bilingual transmission). Storing adjustments automatically Adjustments made in the PICTURE and SOUND menus and to volume are stored automatically. Values are stored under PERSONAL in the picture and sound smart controls ( and keys). Features menu You can adjust: · TIMER (see next page), · LOCK: Set to ON to lock the television keys. Switch off the TV and hide the remote control. The TV cannot now be used (only the remote control will enable you to switch the TV on). · NR (Noise Reduction): Useful in case of poor reception to reduce picture noise (snowy picture). 7 Timer menu This menu allows you to use your TV as an alarm clock. Use the key to select the following settings: Â TIME: enter the current time ( or keys). If the channel selected does not broadcast teletext, the message P100 is displayed and the screen stays black (in this case, exit from teletext and select another channel). Selecting a teletext page Use keys to or P to enter the page number required. E. g. : page 120, type . The number is displayed in the top left-hand corner of the screen, the page counter starts searching and then the page is displayed. If > xxx < flashes briefly or the counter continues searching, this means that the selected page is not broadcast. Direct access to an item Coloured zones are displayed at the bottom of the screen. The 4 coloured keys are used to access the items or their corresponding pages. The coloured zones flash when the page or the subject is not yet available Stop the sequence of sub-pages Certain pages have sub-pages which follow on automatically. Press the key to disable and enable the sequence of sub-pages. The message I appears in the top left-hand corner of the screen. Enlarging a page Press this key to display the upper part, the lower part and then to return to the normal page size. Reveal Use this key to reveal / conceal hidden information (solutions to games). Overlaying text on the TV picture To activate / deactivate the screen overlay. Favourite pages For teletext programmes 0 to 29, you can store 4 favourite pages which you can then access via the coloured keys . [. . . ] Peripheral equipment gives a black and white picture You have not selected the right socket with the key: S-VHS2(or S-VHS3) instead of EXT2 (or EXT3). To play a video cassette, check that it has been recorded under the same standard (PAL, SECAM, NTSC) which can be replayed by the video recorder. No sound If on certain channels you receive a picture but no sound, this means that you do not have the correct TV system. Remote control The TV set does not react to the remote control; the indicator on the set no longer flashes when you use the remote control? [. . . ]